Newbie looking for help
05-19-2014 | 01:59 PM
#1
Thread Starter
Registered
Joined: May 2014
Posts: 2
Likes: 0
From: Indina Rocks Beach, FL
Newbie looking for help
Hi all,
New to this forum and looking for help. My uncle and I are restoring a 1969 35ft Magnum Sportfisherman that been in the family since it was made. It had many a person work on it throughout the years, and now my uncle and I are going to have at it. It's powered by 2 - 7.4L marine Power carbed engines & borg transmissions. Boat is in great shape and we're trying to keep it as original looking as possible. I need some help with finding a window gasket seal that will fit the channel. I've been looking around and can't seem to find anything that matches. I would rather not just use 5200 or a silicon without the proper gasket. Any one have any suggestions on where I could go?
Thanks in advance.
Ballymac
New to this forum and looking for help. My uncle and I are restoring a 1969 35ft Magnum Sportfisherman that been in the family since it was made. It had many a person work on it throughout the years, and now my uncle and I are going to have at it. It's powered by 2 - 7.4L marine Power carbed engines & borg transmissions. Boat is in great shape and we're trying to keep it as original looking as possible. I need some help with finding a window gasket seal that will fit the channel. I've been looking around and can't seem to find anything that matches. I would rather not just use 5200 or a silicon without the proper gasket. Any one have any suggestions on where I could go?
Thanks in advance.
Ballymac
