Bolster seats
09-07-2014 | 06:47 PM
#1
Thread Starter
Registered
Joined: Sep 2008
Posts: 455
Likes: 0
From: Bedford & Wolfeboro, NH
Bolster seats
Who amongst the Magnum 27 28 owners has bolster seating, two individual bolsters port and starboard?
Please post pictures and if you know who built them that would be supper awesome!
Mario
Please post pictures and if you know who built them that would be supper awesome!
Mario
09-07-2014 | 10:35 PM
#2
Gold Member
Joined: Dec 2003
Posts: 3,496
Likes: 63
From: NewBaltimore Mi
09-09-2014 | 03:54 PM
#3
Registered
Joined: Jun 2011
Posts: 136
Likes: 3
From: Severna Park, MD
Mario,
The bolsters in my old Sedan were made by Built Rite (the OEM supplier to Magnum in the 70's). They had 1 inch marine plywood frames with aluminum angle at the corners. Unfortunately, Built Rite no longer makes these seats.
Ben
[ATTACH=CONFIG]529139[/ATTACH][ATTACH=CONFIG]529140[/ATTACH][ATTACH=CONFIG]529141[/ATTACH]
The bolsters in my old Sedan were made by Built Rite (the OEM supplier to Magnum in the 70's). They had 1 inch marine plywood frames with aluminum angle at the corners. Unfortunately, Built Rite no longer makes these seats.
Ben
[ATTACH=CONFIG]529139[/ATTACH][ATTACH=CONFIG]529140[/ATTACH][ATTACH=CONFIG]529141[/ATTACH]
09-10-2014 | 12:51 PM
#4
Gold Member
Joined: Dec 2003
Posts: 3,496
Likes: 63
From: NewBaltimore Mi
I started out with a junk side by side stand up from a Fountain Executioner. The only thing I used was stainless tubing, but it gave me a place to start to build the wood frames . Bills Upholstery guy who did his Fino made it all come to life. Mark
