Rick G

I am going to start the glass work on my hull this spring . My hull currently has no cockpit floor as the previous owner removed to with intent of lower it. My question is was the floor glassed in place or was it 2 pieces fastened in place .
Thanks Rick G.

h2oboater

The factory plywood floor was glassed in place on the stringers & to the front bulkhead & sides of the hull. My sport had it's floor replaced with pressure treated wood & screwed in place, I replaced that with 3/4 plywood & glassed in place.

Rick G

Thanks H20 . Makes sense and for a much firmer ride .
RG.

scippy

iTrader: (3)

Rick here's a pic of the lowered cockpit sole...you can see the height difference just by looking at the entrance to the cabin.

Rick G

Thanks Scippy . Any more pics.

scippy

iTrader: (3)

Rick.........here's some pictures that I posted when restoring the Sport on the Donzi site...go to post 303

http://www.donzi.net/forums/showthre...r-Coosa/page21

Rick G

Nice work Scippy . That answers all my questions.
RG.