I would not hesitate to call Tony at CMS. He has a lot of HP experience as well as former racing exp too. He's done both my 502's and will be doing another set for me again. PM me if you want the contact info.

hey mister 38 top gun, are you sure you want to do this here? The reason you are sorry has nothing to do with CMS or Tony. The entire situation that you have is unfortunate, but its a simple process to navigate through. Nobobdy else is sorry to deal with CMS, only you.

Steve1209 sorry for the above but it needed to be put up, all being said everything you are looking for can be handled at CMS from start to finish, machine work, and re-rig if necesary. Hope this is helpful.

Tony 410-335-2226
CMS Racing Engines

Who is this????? Are you from the Baltimore area??? The only 38 Cigs that CMS has worked on that I know of...all run like champs...

Have you ever had work done by CMS???!!!

I pretty much know everyone who has had work done by CMS in the last 2 years and not one person has been disappointed...He built motors for my dad and they are the most reliable motors he's ever had in all his boating years....

If your talking about CMS in Middle River...I think you have your story mixed up...

MDG is top notch.

Dave at MDG is great I do alot of work with them and he is very good.

I met Dave at Londontowne years ago, great guy. He is recommended by many for as long as I can remember. I don't remember a machine shop being down there though. Is Dave doing his own machine work now?

I know so many pleased boaters who rely on Tony @ CMS who say he is a great mechanic. Never hear anything but good stuff from more than a dozen people. I'm in Middle River and have no doubt that he is the man around here!

John at Jaws Marine would be another good guy to talk to
http://www.jawsmarine.net/index.html

Jim at LMS does good work. 410-760-2636

Call this # 252 244 1876 , his name is Frank .
Its in NC .

Building race and plessure motors for over 30 Years.