Engine Builder Monty Cline of Chester VA.
02-05-2011 | 04:20 PM
#1
Thread Starter
Charter Member
Joined: Oct 2000
Posts: 1,353
Likes: 0
From: richmond virginia
Engine Builder Monty Cline of Chester VA.
I just wanted to put it out there that Monty is back to building engines full time, anyone that been around performance for any length of time knows or has heard of Monty Cline. Monty has been building my Race Engines for years and is very reasonable, he let's me do all the stuff i can do (pull engine out, remove accessories) witch saves me money and he handles everything I can't do. Anyone that knows Monty knows how meticulous he is and will find the best solution to any problem. You can call him direct at 804-307-4117
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
Last edited by fastedy; 02-05-2011 at 04:31 PM.
03-16-2011 | 06:19 PM
#5
Registered
Joined: Sep 2006
Posts: 1,250
Likes: 0
From: Richmond - Ophelia, Va
03-17-2011 | 06:15 AM
#6
Thread Starter
Charter Member
Joined: Oct 2000
Posts: 1,353
Likes: 0
From: richmond virginia
Yes, The shop is off Rt1, 1st Left going south on 1 past John Tyler, a mile or so on the right, dropped my motor off there last week, he found 2 bad rockers that could have been catastrophic.
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
03-17-2011 | 10:43 AM
#7
Registered
Joined: Nov 2010
Posts: 628
Likes: 1
From: Hertford, Nc
fastedy,
I have a 502mpi that needs a re-build. What kind of time frame do you think for something like this?
I bought a 598 from a guy named Tom with a superboat. I believe you know this guy. I have not done a thing with the motor yet mainly because I am having a hard time spending the money on a drive that will handle it. So now I am thinking of just rebuilding my 502 and bumping up the hp a little and selling the 598. I work in Afghanistan and I am only home for short periods of time thus the reason for turn around time on the rebuild.
Brad
I have a 502mpi that needs a re-build. What kind of time frame do you think for something like this?
I bought a 598 from a guy named Tom with a superboat. I believe you know this guy. I have not done a thing with the motor yet mainly because I am having a hard time spending the money on a drive that will handle it. So now I am thinking of just rebuilding my 502 and bumping up the hp a little and selling the 598. I work in Afghanistan and I am only home for short periods of time thus the reason for turn around time on the rebuild.
Brad
03-18-2011 | 03:02 AM
#8
Thread Starter
Charter Member
Joined: Oct 2000
Posts: 1,353
Likes: 0
From: richmond virginia
fastedy,
I have a 502mpi that needs a re-build. What kind of time frame do you think for something like this?
I bought a 598 from a guy named Tom with a superboat. I believe you know this guy. I have not done a thing with the motor yet mainly because I am having a hard time spending the money on a drive that will handle it. So now I am thinking of just rebuilding my 502 and bumping up the hp a little and selling the 598. I work in Afghanistan and I am only home for short periods of time thus the reason for turn around time on the rebuild.
Brad
I have a 502mpi that needs a re-build. What kind of time frame do you think for something like this?
I bought a 598 from a guy named Tom with a superboat. I believe you know this guy. I have not done a thing with the motor yet mainly because I am having a hard time spending the money on a drive that will handle it. So now I am thinking of just rebuilding my 502 and bumping up the hp a little and selling the 598. I work in Afghanistan and I am only home for short periods of time thus the reason for turn around time on the rebuild.
Brad
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
03-18-2011 | 10:57 AM
#9
Registered
Joined: Nov 2010
Posts: 628
Likes: 1
From: Hertford, Nc
Did that motor come from California? if so it must have come from that boat I bought and sold last year. Give Monty a call, thats his cell number above, Im sure he could work with your time constrants with some notice, tell him you got his number from this post, I told him I would spread the word
I will call Monty today and metion this post.
Brad
