Lake Lanier Mechanic
08-18-2003, 08:08 PM
#1
Registered
Thread Starter
Lake Lanier Mechanic
Any good high performance mechanics in the Cumming/Lanier area? I need a intake resealed and some Holley tweaking ( jets, power valves). Most I know of are just too busy or just don't really mess with high performance.
Thanks guys,
Greg
Thanks guys,
Greg
08-18-2003, 10:01 PM
#2
Mod Squad Enforcer
Charter Member
Join Date: Nov 2002
Location: On the way to a PR near you
Posts: 12,958
Received 795 Likes
on
258 Posts
Hey Greg,
See Bob over at the Fountain building on Browns Bridge rd. He works on lots of Hi-Performance, from older small tunnels up to the fastest on Lanier, Garth's 36' Skater.
They are bending over backwards up there now, the guy that previously leased the building talked a good game and left them w/a few messes. They have gone above and beyond to help those who were upset and make sure new customers get over the top service.
Please tell Bob that Greg(aka CASH BAR) sent you.
Greg
678-778-4734
See Bob over at the Fountain building on Browns Bridge rd. He works on lots of Hi-Performance, from older small tunnels up to the fastest on Lanier, Garth's 36' Skater.
They are bending over backwards up there now, the guy that previously leased the building talked a good game and left them w/a few messes. They have gone above and beyond to help those who were upset and make sure new customers get over the top service.
Please tell Bob that Greg(aka CASH BAR) sent you.
Greg
678-778-4734
08-18-2003, 10:04 PM
#3
Mod Squad Enforcer
Charter Member
Join Date: Nov 2002
Location: On the way to a PR near you
Posts: 12,958
Received 795 Likes
on
258 Posts
You can also get outstanding work in Buford from Tony Garrison at MERLIN MARINE if you don't mind the drive.
He does work alone, and is usually booked so maybe call first.
Greg
He does work alone, and is usually booked so maybe call first.
Greg
08-19-2003, 06:30 AM
#4
Registered
Join Date: Dec 2000
Location: Cumming,GA,USA
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
I'll second that motion for Bob. He does great work. I might offer this up.
You could pull the carb and send it up to BarryGrant for a "tune up" (think its under $100), then deliver it and the boat to Bob so he can do the intake work and put it back together. (just a thought). I'm thinking BG is up in Dawsonville.............
Either way, take the boat to Bob.
You could pull the carb and send it up to BarryGrant for a "tune up" (think its under $100), then deliver it and the boat to Bob so he can do the intake work and put it back together. (just a thought). I'm thinking BG is up in Dawsonville.............
Either way, take the boat to Bob.
Platinum Member
