This weekend.....On the water!
#1
Registered
Thread Starter
This weekend.....On the water!
Has anybody else been out yet around central, il? I went for a quick shakedown cruise saturday afternoon (55 sunny). It was windy on lake shelbyville but i was just glad to hear the boat run with no silent thunder. Just curious....
#3
Registered
I splashed my boat last Wednesday afternoon (3/26) and put it on the lift on Dock 3 at Clinton Lake.
#4
Registered
Thread Starter
That's awesome knot i test drove my boat on clinton lake so i know how you feel!
#5
Registered
#6
Registered
Thread Starter
I bought it from jim and jeff last year early in the season. I went through two starboard motors due to craptastic old manifolds and a bad lifter set on the first rebuild. I upgraded to imco's and the new motor the second time around seems to be running great!
#7
Registered
Cool. I know the boat. Looked at it a couple times. Nick Walters did the original work on the starboard motor before he left Clinton Marine.
#8
Registered
Thread Starter
That's good to know. I know both motors were done at some point because the heads had markings on them that they were to be done for clinton marine. Other than that i think the boat spent it's whole life in the ozarks til joe martin brought it home to decatur. You will have to give me a shout if you are on shelbyville in the summer
#9
Registered
Join Date: Jan 2007
Location: Boat-LOTO/Home-St Louis
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
454 Platform question
Do you have any pics of the platform where it meets up with the rear of the boat? I saw some in the past that curved with the rub rail rather than straight across. Just wondering how yours looks when you are standing on it.
Thanks!
Thanks!
#10
Registered
Thread Starter
I will get some pics, my platform is straight across. Below the rub rail the transom doesn't curve like it does above.