Need Engine Help --- ATECO Engines ???
#1
Registered
Thread Starter
Join Date: Nov 2006
Location: Omaha, NE
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Need Engine Help --- ATECO Engines ???
Hello from LOTO
Do any of you have experience with an ATECO engine package? Looking at the 540/700.
I have 320 hours on factory 500HPs with carbs in a Formula 353. Thinking of rebuilding but the ATECO may make sense if the quality and depenability are there.
If I rebuild mine; any suggestions as to engine specs or who is the best at LOTO or KC / STL area ?
Thanks, appreciate all the experienced input here !!!
...watchin' the leaves fall in Omaha
Jack353
Do any of you have experience with an ATECO engine package? Looking at the 540/700.
I have 320 hours on factory 500HPs with carbs in a Formula 353. Thinking of rebuilding but the ATECO may make sense if the quality and depenability are there.
If I rebuild mine; any suggestions as to engine specs or who is the best at LOTO or KC / STL area ?
Thanks, appreciate all the experienced input here !!!
...watchin' the leaves fall in Omaha
Jack353
#3
Charter Member # 55
Charter Member
Hello from LOTO
Do any of you have experience with an ATECO engine package? Looking at the 540/700.
I have 320 hours on factory 500HPs with carbs in a Formula 353. Thinking of rebuilding but the ATECO may make sense if the quality and depenability are there.
If I rebuild mine; any suggestions as to engine specs or who is the best at LOTO or KC / STL area ?
Thanks, appreciate all the experienced input here !!!
...watchin' the leaves fall in Omaha
Jack353
Do any of you have experience with an ATECO engine package? Looking at the 540/700.
I have 320 hours on factory 500HPs with carbs in a Formula 353. Thinking of rebuilding but the ATECO may make sense if the quality and depenability are there.
If I rebuild mine; any suggestions as to engine specs or who is the best at LOTO or KC / STL area ?
Thanks, appreciate all the experienced input here !!!
...watchin' the leaves fall in Omaha
Jack353
#4
Registered
iTrader: (1)
Jack353 and Wildthing357, fyi...if you're looking for reliable offshore performance engines, there are people who bring their engines all the way from the Detroit area and from LOTO to WESCO (Dave Wesseldyk's shop) in the western Michigan area. He is at least worth a phone call or stop in his shop and see some of the wild stuff he builds. Dave's phone is...616-662-2250
#5
Banned
Be carefull with At@co
Be prepared to wait forever 4 your chit
Last edited by Racegirl3; 11-06-2009 at 12:03 PM. Reason: not necessary
#6
Registered
Thread Starter
Join Date: Nov 2006
Location: Omaha, NE
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
I visited the Dyno-flow folks a year or so ago. I think I'm going to look elsewhere although I've never run their product. Sounds like people are happy with Wesco and Riss. I'll contact both
#7
Jack,
Several good places at LOTO to do the work. People like CPR or you can call Doug at http://performanceboatbrokerage.com/ and he can help you out.
Several good places at LOTO to do the work. People like CPR or you can call Doug at http://performanceboatbrokerage.com/ and he can help you out.
#8
Registered
iTrader: (1)
A couple of things to consider about Wesco.....Dave does not advertise...he does not need to and he is always busy and his work/offshore engines speak for themselves.
Another thing is unless he has his hands full, Dave will always answer his phone. He doesn't run from or avoid people---he has no need to. He is a true professional.
Another thing is unless he has his hands full, Dave will always answer his phone. He doesn't run from or avoid people---he has no need to. He is a true professional.
#9
Platinum Member
Platinum Member
Join Date: May 2005
Location: Magnolia, Texas
Posts: 2,124
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
im for ateco
i took my 502 carb motors out of my cafe racer and brought them to bill. his estimate was they were not 415 hp more like 385 the way they were rigged. they are now 525 hp 502 cu carb motors. not a hick up boat has never sounded or run so good. bills estimate was right on the money. and so was the time. start now dont wait till all engine builders are busy. my vote is ateco