![]() |
Originally Posted by kreed
(Post 3251910)
Which is faster? Cig or Fountain????/
|
Originally Posted by Griff
(Post 3252289)
Very close from what I have seen posted by them.
The Fountain has an extra 500efi in it compared to the Gladiator. Lots of pics of both boats on MWBP. I'm 81 GPS with triple 500 EFI's and the Glad is running 92 GPS with 525 EFI's two different animals. Last Saturday the run we did to Captian Rons we didn't come under 70 much. The 44SL did some 116 mph passes and came by us like we were standing still. It was a fun day. |
Originally Posted by eddie
(Post 3252703)
I'm 81 GPS with triple 500 EFI's and the Glad is running 92 GPS with 525 EFI's two different animals. Last Saturday the run we did to Captian Rons we didn't come under 70 much. The 44SL did some 116 mph passes and came by us like we were standing still. It was a fun day.
|
Originally Posted by JaayTeee
(Post 3252813)
I'd say we didnt come under 79 much:D
|
Originally Posted by JaayTeee
(Post 3252813)
I'd say we didnt come under 79 much:D
|
Originally Posted by eddie
(Post 3290844)
Hows the power coming along in the TG? Will I be able to keep up? :eek:
We start tear downs tomorrow. Been alot of stuff going on as of late....holidays, snow removal, hunting, etc....finally got some time to get going on them. I cant answer question # 2 yet;) |
Originally Posted by JaayTeee
(Post 3290966)
We start tear downs tomorrow.
Been alot of stuff going on as of late....holidays, snow removal, hunting, etc....finally got some time to get going on them. I cant answer question # 2 yet;) |
Originally Posted by redbud35
(Post 3292304)
How much HP?!
( looked very good) the starboard comes apart today....we'll know more later today ;) |
Originally Posted by JaayTeee
(Post 3292435)
Got the port engine apart and stripped down yesterday,
( looked very good) the starboard comes apart today....we'll know more later today ;) |
Originally Posted by eddie
(Post 3294678)
updates? How many hours were on the 500's? I've got 250 just wondering when I need to start thinking about head gaskets, etc. Adam's went around 450 hours I think.
The only thing that looked a little iffy was that the head gaskets didnt look so good inbetween the cylinders. Still could see the cross hatching in the cyl walls. Didnt notice any broken valve springs, the lifter rollers felt good, havent tore into the heads since they may not be going back on them;) I dont know how Jeff ran it, or how the previous owner before him ran it, but I do know that since Aug 09', it's been worked pretty hard, and they look pretty daam good, so judging by how these look, I'd say you shouldnt have to worry for a while |
| All times are GMT -5. The time now is 07:51 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.