Outdrive blocks
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
have a 35 motion and the previous owner took out the #6's and 525's and was going to put some 400Rs on it. In doing so he had sealed up the back of the boat completely and cut off the little boxes that accomodated the top of the outdrive. I have attached pictures where the boxes should be but have no idea the height or the width of them. Can anyone please assist? Just a Measurement from the corner of the hull to the outer of the box. width of the box and height of the box . also thickness would be appriciated thanks
![](https://cimg9.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/1280x720/back_2_5ff0acf738d32ab5d692c6214a5d8e660b53bd66.jpg)
the boxes iam talking about is where my mouse is
![](https://cimg0.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/1280x720/back_35716355430d7381d293616e52b63b1ec910c991.jpg)
this is our current set up
![](https://cimg9.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/1280x720/back_2_5ff0acf738d32ab5d692c6214a5d8e660b53bd66.jpg)
the boxes iam talking about is where my mouse is
![](https://cimg0.ibsrv.net/gimg/www.offshoreonly.com-vbulletin/1280x720/back_35716355430d7381d293616e52b63b1ec910c991.jpg)
this is our current set up