Weight of a 39 MTI and trailer?
#12
Registered
Thread Starter
This thread is one year old. Anyway I am postive it is under 14,000. Carbon Fiber hull and deck, 200 lbs of canopy is gone. My interior weighs maybe 50 lbs all four Sparco seats. Aluminum Myco. I should run it through a scale though to be sure. You got me curious again.
#14
Registered
Thread Starter
Ateco has two of my boats on the home page of the website.
Powerboat Magazine did a great article about 18 months ago about my engines built by Ateco.
Right now Ateco is super busy and is swamped with orders for new engines. His engines are proving themselves to be reliable true horsepower.
Powerboat Magazine did a great article about 18 months ago about my engines built by Ateco.
Right now Ateco is super busy and is swamped with orders for new engines. His engines are proving themselves to be reliable true horsepower.
#15
Banned
I tell you what, Bill hit it out of the park in Powerboat mag with his 700hp motor priced at less than $13,000! The next cheapest engine was Dean Gellner's 750 at $32,000.
Maybe he's got the 1050 Dominator figured out. I had one on my motor and it was a MAJOR PITA. Constantly died around the docks. Turned me off carb motors forever.
Maybe he's got the 1050 Dominator figured out. I had one on my motor and it was a MAJOR PITA. Constantly died around the docks. Turned me off carb motors forever.
Last edited by Catmando; 07-01-2009 at 11:04 PM.
#18
Registered
Thread Starter
Running twin Ateco 1150's. Fresh engines have two hours on them now. Boat pulls like a freight train. Almost scary how much torque it has a 100 mph. Sets you back in the seat.
We ran the boat Sunday in the River Shiver. Pictures and video here.
http://www.offshoreonly.com/forums/n...ml#post3519043
We ran the boat Sunday in the River Shiver. Pictures and video here.
http://www.offshoreonly.com/forums/n...ml#post3519043