Gimble Rings & bell and.......
 

We have NEW take off Gimble Rings with the Bell & trim limit/sender
on the shelf and ready to go.
Merc part #822374A4
Retail from Merc for $849.90
your from TEAGUE CUSTOM MARINE for $424.95
thats 50% OFF

I Have A Few Of These Left On The Shelf And Ready To Ship

Any complete gimbles laying around?

Is there any hours on these gimballs at all and I am assuming that will work with a bravo three.How much for the upper pin that goes through the top of the gimball and do you have them.

PQMAN,you need the gimbal RING and Pin NOT hte complete
unit.

everything should fit right up no problem.and these are new
with no hours. if you are replacing this part i am just going
to assume that you have a lot of play in you steering, if this is
the case then you may not need the pin. if you havent taken
it apart yet you may want to do so first before you order the
pin to make sure that it is bad or good (probably good). the
pin costs $254.93

Are these XR. gimbles?

My upper pin is good. THe lower (female) is worn.

Do I have to take the tramsom assy. off to replace the gimbles? if not. I need one of these gimble sets. Are these bravo 1's ?

Thx

they fit all bravo style drives XR,X,Bravo1,XZ. they are stock assy not the HP

you do not have to remove the transom assy from the boat to do the repair and i still have some available so give me a call and lets get your name on one.