Official Nor-Tech picture thread
#31
Platinum Member
Platinum Member
Re: Official Nor-Tech picture thread
Originally Posted by Stormrider
BTW, the one thing thats nice for cruising, that all perf. boats seem to lack is radar. We all know that arches are butt ugly, but could someone fabricate a mast, that sits behind the rear bench, where a radar can be mounted?
#33
Registered
Re: Official Nor-Tech picture thread
ASD 8's 75 MPH, 65 cruise, WOT is 50GPH.
Don't know how you could do a mast that looked good, was strong enough, and was high enough that you didn't microwave your melon.
If you want the radar do the arch and it gives you a nice platform for the fore and aft bimini.
Don't know how you could do a mast that looked good, was strong enough, and was high enough that you didn't microwave your melon.
If you want the radar do the arch and it gives you a nice platform for the fore and aft bimini.
#34
Platinum Member
Platinum Member
Re: Official Nor-Tech picture thread
Terry tell me whats going on with the dash. Looks awesome, neat and professional.
#35
JC Performance Engines
Gold Member
Re: Official Nor-Tech picture thread
Originally Posted by salesmanship
ASD 8's 75 MPH, 65 cruise, WOT is 50GPH.
Don't know how you could do a mast that looked good, was strong enough, and was high enough that you didn't microwave your melon.
If you want the radar do the arch and it gives you a nice platform for the fore and aft bimini.
Don't know how you could do a mast that looked good, was strong enough, and was high enough that you didn't microwave your melon.
If you want the radar do the arch and it gives you a nice platform for the fore and aft bimini.
I was thinking of an aluminum mast about 6" at base tapering at it got higher w/ a crossbar up top for mounting.
It could rake forward, and be 2ft over drivers heads?
I always thought this could look good on a 38-40 magnum, but never did any drafting.
#36
JC Performance Engines
Gold Member
Re: Official Nor-Tech picture thread
Jeff, sounds like your putting together an awsome package.
What kind of boating do you do? Any cruising?
What kind of boating do you do? Any cruising?
#37
JC Performance Engines
Gold Member
Re: Official Nor-Tech picture thread
Wow, look what just popped up in the classifieds... for military use. And if ya can't figure it out... look at the radar mast/stand, whateva ya wanna call it.
#38
JC Performance Engines
Gold Member
Re: Official Nor-Tech picture thread
Now, that is a 27ft boat, and i think it would look better on a larger boat... scale wise. I would not have to be any higher than on this boat.
#40
JC Performance Engines
Gold Member
Re: Official Nor-Tech picture thread
just behind the rear bench, attached to the stringers.
Mold the engine hatch around it.
I was never a big fan of radar arches on the lower narrow boats.
On a big 53ft magnum it looks in place, but they start to look tall on lower freeboard, narrower boats, IMO.
I thought this may be a solution.
Mold the engine hatch around it.
I was never a big fan of radar arches on the lower narrow boats.
On a big 53ft magnum it looks in place, but they start to look tall on lower freeboard, narrower boats, IMO.
I thought this may be a solution.