36 W/ Arneson Surface Drives
#1
#2
Registered
Joined: Aug 2004
Posts: 3,812
Likes: 2
From: Paducah KY KY Lake
Dry Pipe,
Since I'm the owner I can give some light on the subject,
no porpoise at any speed, no 1000lbs. hanging off the rear, no suggested 100hr rebuilds, backs, docks, turns better than ANY boat i ever had. Stays on plane at a craw...anyone is welcome to take a ride... That & the engines are the best part of the boat....
Since I'm the owner I can give some light on the subject,
no porpoise at any speed, no 1000lbs. hanging off the rear, no suggested 100hr rebuilds, backs, docks, turns better than ANY boat i ever had. Stays on plane at a craw...anyone is welcome to take a ride... That & the engines are the best part of the boat....
Last edited by customryder; 08-22-2006 at 06:48 PM.
#4
Registered
Joined: Aug 2004
Posts: 3,812
Likes: 2
From: Paducah KY KY Lake
Originally Posted by drypipetiger
Thanks for the info... Boat looks incredible.
I'm currently for sale for possibly a 36 purchase. We'll see what happens.
I'm currently for sale for possibly a 36 purchase. We'll see what happens.
#8
DPT, aren't you on your way to LOTO? If so KY Lake is not that far of off the beaten path you'll be traveling. I'm pretty sure you'll be taken I-64 to and from. When you get to Mt. Vernon, ILL. Ky Lake is all but 2 hours to the south.
here's a pic I took over the weekend at the KY Lake PR
http://www.offshoreonly.com/forums/a...hmentid=228649
If you do get it make sure you get matching life jackets
Jeff spent so much time making this boat what it is..he forgot to order jackets and he was almost forced to wear the ORANGE one's
for the run until somone loaned him a set
here's a pic I took over the weekend at the KY Lake PR
http://www.offshoreonly.com/forums/a...hmentid=228649
If you do get it make sure you get matching life jackets
Jeff spent so much time making this boat what it is..he forgot to order jackets and he was almost forced to wear the ORANGE one's
for the run until somone loaned him a set
#10
Banned
Joined: Feb 2005
Posts: 1,459
Likes: 1
From: Cleveland, Ohio
Anyone needing any information on these powerplants, please feel free to contact me @ (216) 398-8500. They are built with the highest quality machining and components money can buy! Jeff did it right!
Dean Gellner
Dean Gellner



