Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Nor-Tech (https://www.offshoreonly.com/forums/nor-tech-143/)
-   -   Ayon remember this 380LE? (https://www.offshoreonly.com/forums/nor-tech/231174-ayon-remember-380le.html)

Chuck 05-28-2010 07:34 PM

There are some great shots of Carguys 38 on the Lake George Demo Race threads.

Mike A. 05-29-2010 06:58 PM


Originally Posted by Chuck (Post 3122506)
There are some great shots of Carguys 38 on the Lake George Demo Race threads.

Thanks. Gorgeous boat!

jeff1000man 06-01-2010 10:07 AM


Originally Posted by Carguy08 (Post 3121853)
I cant post pics.

Send them to me at [email protected]

jeff1000man 06-01-2010 10:12 AM

Anyway. I looked at it last Wed before I left for Bimini. Paint still shines, but it had a lot of dock rash. It should buff out. There are a lot of paint chips down at the edge of the strake. It still shines though so if I can buff through the dock rash it will clean upp nicely on the outside. Upholstery is a .5 out of 10. It is really terrible. It has been sitting un covered in the boat yard. You can see where the cover was folded up in the sun and it is faded.

Engines turned over very smoothly. Cusious as to why his mechanic said they were blown. Doesn't crank like there is a dead hole. The starbord engine did get very hot though. It has expected light corrosion on drives etc. Looks like sportmasters and XR's, ao that is good.

Leaving tomorrow for Cali to go pick it up.

Can;t wait to get started on this one.

scarab600 06-03-2010 07:14 PM

Hey Mike what was your setup. I had 720hp 32 hydro 5 blade 2in shortys with 1 in spacers running 92 mph. Now I have 830 hp but no top speed yet.

Gordo 06-08-2010 12:49 PM


Originally Posted by Mike A. (Post 3118639)
Hmmmm. It should run closer to 90 with the stock 500's. We were running those speeds back when the only prop choice was 29" three blade Mirage Plus.

Use to Love watching you and Adib fly by us back in those days. That boat looked beautiful...

jeff1000man 06-13-2010 08:47 PM


Originally Posted by Mike A. (Post 3118639)
Hmmmm. It should run closer to 90 with the stock 500's. We were running those speeds back when the only prop choice was 29" three blade Mirage Plus.

I understand it ran over 100 with the blowers and handled pretty well. PM Steve Miklos and he can give you John's number. John put the blowers on the boat.

Whatever you do, leave the drives on the transom. No boxes. My new 38 did not like the boxes and high X. You may have to drive it a little bit but it is a fun boat that will not bite you if you stay on top of it. Enjoy. Very cool boat.

John actually called me this evening. Thanks for the call John. He said it ran 83 with 1000HP. That is good enough for me right now. I am ditching the engines for a new pair that I have had sitting around in my shop. Transporter is picking it up on Friday, so maybe I will have it in the middle of the week.

jeff1000man 07-11-2010 08:55 PM

It's here. I started a new thread for posting pics and info during the restoration. THe paint on this thing is incredible. Still shines like brand new. Clear is miles deep.

jeff1000man 07-14-2010 06:34 PM

Port engine runs perfectly so far

The starboard engine fired off a few minutes ago like there was nothing wrong with it. After a few revs though it started popping and sputtering.

Guess I'll investigate some more tonight after I write some more files, and pay some more bills. Boat is starting to intruige me. :coolcowboy:

Stay tuned.

Had another offer come in on them today. After today though, I really want to run them and see what kind of nuts this boat has before I take it apart.

Pantera1 09-24-2010 04:53 PM

What happened?


All times are GMT -5. The time now is 07:49 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.