Offshoreonly.com
Page 6 of 8
« First
4
5
6
7
8
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Nor-Tech (https://www.offshoreonly.com/forums/nor-tech-143/)
-   -   NorTech 47 Cat "Ballistic" (https://www.offshoreonly.com/forums/nor-tech/245869-nortech-47-cat-ballistic.html)

LAriverratt 02-17-2011 06:39 AM
1 Attachment(s)
this must be catman after words on the way home:lolhit:

Attachment 440532

all in fun and games cat just joking:ernaehrung004:

flight club 02-17-2011 10:25 AM
Originally Posted by SLOWRIDE-388 (Post 3328644)
Glad to see its going to a good home. Sounds like a fun project. Can't wait to see it running again.

Did ya sell your skater?
no, I still have the 36 and a new one being built, just couldn't pass this one up

Downtown42 02-17-2011 01:07 PM
congrats! is it allowed at the Skater Party?

flight club 02-17-2011 01:11 PM
Originally Posted by Downtown42 (Post 3329179)
congrats! is it allowed at the Skater Party?
Nope. LOL

SLOWRIDE-388 02-17-2011 08:48 PM
Originally Posted by flight club (Post 3329034)
no, I still have the 36 and a new one being built, just couldn't pass this one up
No problem, always liked the setup and design of that 368. Good luck on the sale.

Catmando 02-22-2011 07:55 PM
Originally Posted by LAriverratt (Post 3328846)
this must be catman after words on the way home:lolhit:

Attachment 440532

all in fun and games cat just joking:ernaehrung004:
:eek: I look more like Buddha than that guy(5'10" 270lbs).

Snakebite A-82 07-14-2011 07:11 PM
ballistic bottom
 
Originally Posted by texaschopper (Post 3301229)
I have not been down there in a while, but the boat was on a rack at Legendary here in Destin. It was it on the top rack so it was rather high up, but to me the botttom "appeared" to be rather rough looking.
The bottom of this boat has major problems. I was the first (and only) boat that they tried to build using post cured epoxy. The results were disasterous...the boat spent most of its time behind the NorTech shop having holes drilled into the bottom so water could drain, then getting epoxy injected tnto it to "glue" it back together.

flight club 07-14-2011 07:25 PM
Originally Posted by Snakebite A-82 (Post 3453078)
The bottom of this boat has major problems. I was the first (and only) boat that they tried to build using post cured epoxy. The results were disasterous...the boat spent most of its time behind the NorTech shop having holes drilled into the bottom so water could drain, then getting epoxy injected tnto it to "glue" it back together.
They must have fixed it then, it works great for me. Oh , and what kind of boat do you have Mr. Wizard?

Snakebite A-82 07-14-2011 07:46 PM
Personally , I don't own a boat....but you can't discount the fact that I worked at the Nortech factory while "your boat " was being built, and also when it was back for the many repairs. Does the boat still have the big aluminum plate glued and screwed to the underside rear of the tunnel ?? Gee .... now how would I know about that.:eek:
There's a reason Bill Pyburn didn't keep that boat. You should look into that "Mr Wizzard":lolhit:

flight club 07-14-2011 08:38 PM
Originally Posted by Snakebite A-82 (Post 3453115)
Personally , I don't own a boat....but you can't discount the fact that I worked at the Nortech factory while "your boat " was being built, and also when it was back for the many repairs. Does the boat still have the big aluminum plate glued and screwed to the underside rear of the tunnel ?? Gee .... now how would I know about that.:eek:
There's a reason Bill Pyburn didn't keep that boat. You should look into that "Mr Wizzard":lolhit:
That's why it is called a repair, You fix it, and then it is repaired. Outerlimits, Skater, Mystic and yes Nortech ALL have to change bottoms around on new prototypes. NO, My boat does NOT have an aluminum plate on the bottom. And yes, I personally talked to Bill before I bought the boat.


All times are GMT -5. The time now is 03:05 AM.
Page 6 of 8
« First
4
5
6
7
8
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.