![]() |
Re: What is happening with the 39V
Terry got any interior shots. what power? thanks Jim
|
Re: What is happening with the 39V
Jim,
I see you have one coming with 525's, what speeds are expected with that setup? Thanks Corey |
Re: What is happening with the 39V
That one is sweeeet!!! Nice
|
Re: What is happening with the 39V
I'm looking for 92-93, the 600's ran 96 and heard 3mph difference. for 30k I like the 525. should be great package, actually have 2 39's coming if your interested. thanks jim
|
Re: What is happening with the 39V
I'm heading up this Wednesday, I'd like to stop by and see your facility. We have a place on 6mm so tell me how to get there from there. I also sent you an email in regards to your location on the lake. Thanks for the reply
Corey |
Re: What is happening with the 39V
Our new marina is the first cove past shooters. the docks, gas docks are complete. the new bar, marina store, lounge, showers, service area is a little behind, should be done in 60 days. when the facility is complete we will keep our Nortechs there. Right now the cat is on my hoist at the Ledges and the 50v is on the Trailer at out Road sales office. thanks jim
|
Re: What is happening with the 39V
Originally Posted by RICKY PEREZ
the boat runs in the 95 to 97 mph range. still testing props and setup so i will keep you guys posted on how trials are going.
Any update on your new 39? Have you done any more testing? |
Re: What is happening with the 39V
Originally Posted by RLopez9014
Ricky:
Any update on your new 39? Have you done any more testing? |
Re: What is happening with the 39V
Originally Posted by RICKY PEREZ
I'M GOING TESTING ONCE AGAIN TOMORROW. I WILL KEEP EVERYBODY POSTED ON MY RESULTS.
|
Re: What is happening with the 39V
That Burgundy interior shot is a customer of mine here in Maryland. He's on the board sometimes. I had to go and service the engines the other day, man what a package. Those 650 TMP's really bight. I installed an hour meter and cig light also, the wiring is what I expected, very very nice. Although I would rather see the step pads powder coated, the paint was starting to come off after a few hours of use.
But over all one very nice rig. Kudo's to Nortech!! :D John S. |
| All times are GMT -5. The time now is 02:19 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.