Drive Spacer with Stock Power?
05-31-2006 | 11:27 PM
#1
Thread Starter
Registered
Joined: Jan 2001
Posts: 261
Likes: 0
From: SLC, Utah
Drive Spacer with Stock Power?
Anyone installed with a stock 496 or 502? Is it worth it? If I could pick up 5-10 mph in the mid-range like Raytart I'd be all over that.
Who's got the best prices on spacers?
Who's got the best prices on spacers?
06-01-2006 | 08:16 AM
#2
Registered
Joined: Mar 2002
Posts: 1,546
Likes: 4
From: Layton, Utah
Re: Drive Spacer with Stock Power?
Koko,
Check the first post in this thread...
http://www.offshoreonly.com/forums/s...d.php?t=123879
This was with stock power.
Dave
Check the first post in this thread...
http://www.offshoreonly.com/forums/s...d.php?t=123879
This was with stock power.
Dave
06-02-2006 | 12:59 PM
#4
Registered
Joined: Oct 2000
Posts: 1,382
Likes: 3
From: Spicewood, Texas USA
Re: Drive Spacer with Stock Power?
Yes it will help the midrange several MPH, but more importantly it will carry a load much better. We picked up 2 MPH top end on a stock 496 HO. We ran the boat, installed the spacer and went right back to the same location within a couple of hours so those results are pretty solid.
I have a 1" spacer in stock that I'll sell for $350 plus shipping. We installed it on a boat(not a Nordic) for a test and pulled it right back off(it didn't help). It is absolutely new, but it would not be ethical to sell it as new since it was actually installed on a drive.
Bob
I have a 1" spacer in stock that I'll sell for $350 plus shipping. We installed it on a boat(not a Nordic) for a test and pulled it right back off(it didn't help). It is absolutely new, but it would not be ethical to sell it as new since it was actually installed on a drive.
Bob
Thread
Thread Starter
Forum
Replies
Last Post
Mr. Demeanor
General Q & A
10
06-01-2007 06:42 AM
