![]() |
Re: 28 Heat with Whipple SC
1 Attachment(s)
Thanx Mark,
Heres the boat and tow rig. |
Re: 28 Heat with Whipple SC
Isn't there a pretty good difference in room between the Rage and Heat? I've seen both but can't recall how much difference.
|
Re: 28 Heat with Whipple SC
I was thinking the same thing until Pat posted pictures. Compare post #5 (Rage) against #1 (Heat), the distance between the seat back and engine are identical!!
I thought the SC install was just a bolt on as you can purchase Mercury's HP600 SCI as an option from Nordic on both the Rage and Heat. BobL told me the 502 ci block is shorter than the 496 ci. I fell over when I checked Mercurys website and found an 11 inch difference between the two !! :eek: |
Re: 28 Heat with Whipple SC
Mark you have nothing to say about the Raylar post??????
I know you just want to go faster then me...Not sure you will with the Whipple....If you do go faster Guess i will just have to install a whipple and I should be near 80MPH.....(Not) |
Re: 28 Heat with Whipple SC
2 Attachment(s)
Here are a couple of pictures of a Nordic Rage with a Whipple that are in the classified section. They show how the finished installation/seat/hatch works.
|
Re: 28 Heat with Whipple SC
LOL!! Hey Bent!! I've been looking at both with BobL, the attraction of the Whipple has a couple of advantages (IMHO)
Best HP/$$ spent ratio Easy return to "stock" when selling the boat The negative side is tearing up the drive, steering(?) and 91 Octane gas price.... I wanted to talk with you yesterday.. PM me your tel number.. |
Re: 28 Heat with Whipple SC
The Heat is deeper so the deck lid may not need to be cut(as much). Just have to work it out. I thought someone on here had a Heat with the Whipple package.
|
Re: 28 Heat with Whipple SC
Originally Posted by boatingbent
(Post 2004294)
Mark you have nothing to say about the Raylar post??????
I know you just want to go faster then me...Not sure you will with the Whipple....If you do go faster Guess i will just have to install a whipple and I should be near 80MPH.....(Not) |
Re: 28 Heat with Whipple SC
Thanks Bob!!!!Your a lot of help...LOL
|
Re: 28 Heat with Whipple SC
I rigged a 496HO Whipple in a Heat this past year and had to have the identicle work done as Comfortably Numb.
It does not fit without seat mods. Dave |
| All times are GMT -5. The time now is 02:47 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.