I assumed I read it here but now cannot find the post on how to attach the bottom of the power extension rear nav light on Nordic so that it is not free to move and become damaged or damage the deck. I looked at the light and it is next to a piece of plywood but the assembly is a plastic housing and is not obvious as to how to attach.

I am interested in hearing how anyone successfully attached the bottom of this light.

I just had to replace mine. Mine had a L bracket similar to a plumbing strap that was mounted to the light and then down to the boat. It may be differant in a Rage, I don't know.

j97,
Where did you get your new nav light from? Mine is intermittent now, haven't had time to troubleshot it yet, but just in case it's going bad.....
Thanks,
Dean

Where and how does the L bracket attach to the light housing? I am looking for an attachment point/mechanism that I can use.

Dean, I bought it online at www.iboats.com
Here is the link for the light.

http://www.iboats.com/Innovative_Lig...-view_id.38588

Mine had a specific mounting hole in it. I guess if yours doesn't you could possibly use a hose clamp to secure the strap to the light then mount the other end to the boat. Just a thought.

Where is the specific mounting hole? I may have one but just can not see it the way it is installed

J,
Thanks,
Dean

It is right on the side of the motor about 2 inches up from the bottom.

If you think yours is hard to get to you should see how tough it is in a Flame w/2 engines. You have to send in a small 6 year old that knows how to use use tools.

Thanks.

Yes. That has to be a real challenge.