Offshoreonly.com
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Nordic (https://www.offshoreonly.com/forums/nordic-99/)
-   -   380 K-Plates on Flame (https://www.offshoreonly.com/forums/nordic/217352-380-k-plates-flame.html)

Rage 10-26-2009 09:50 AM
Originally Posted by Nordicflame (Post 2979571)
Look like it will be Spring before I can try them.

Filled her with the pink stuff over the weekend :angry-smiley-055:
Bummer.

Dwane 10-26-2009 10:07 AM
Originally Posted by Nordicflame (Post 2979571)
Look like it will be Spring before I can try them.

Filled her with the pink stuff over the weekend :angry-smiley-055:
Its cheap, you never know December speed runs are fun.

Nordicflame 10-26-2009 01:54 PM
Originally Posted by Dwane (Post 2979650)
Its cheap, you never know December speed runs are fun.
The only speed run I'll get around here in December would be on the trailer going across the ice behind the truck :evilb::evilb:

freekazoid 08-01-2018 07:07 AM
hey im about to replace my 28s with 38s on my Flame. how much do you have to clip off for a good clearance? thanks

snapmorgan 08-01-2018 09:28 AM
I just replaced my 280's with these. No modification necessary

CP Performance - 28" Lower Upgrade Kit

Nordicflame 08-01-2018 10:23 AM
Originally Posted by freekazoid (Post 4641172)
hey im about to replace my 28s with 38s on my Flame. how much do you have to clip off for a good clearance? thanks
Man, I just don't remember but I may have some pics somewhere. You do need to machine the 380s. I remember cutting them on a band saw and then milling them nicely.
They made a world of difference on that boat. I have another post in here somewhere about the results but triple digit stability is achieved.
I will send pics if I can find them and if I can still post pics here..
Dave

Nordicflame 08-01-2018 10:34 AM
Here is the other post...
https://www.offshoreonly.com/forums/...y-results.html

snapmorgan 08-01-2018 01:07 PM
Crude pic that I just drew, but this should work.

snapmorgan 08-01-2018 01:13 PM
1 Attachment(s)
this should be it

freekazoid 08-01-2018 05:20 PM
THANK YOU soooo much u da bomb!!


All times are GMT -5. The time now is 07:56 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.