'03 Nordic heat level problems
#11
Thread Starter
Registered
Joined: Feb 2011
Posts: 7
Likes: 0
From: Baton Rouge, LA
Spicewood TX is a good 8-10hr drive for me, I'll try a guy near new Orleans first, I hear he's the best around here. Then if still nothing I'll see about towing to TX, thanks guys I'll keep ya posted on my issues.
Also my XD is 19"
Also my XD is 19"
Last edited by jodyxjames; 05-11-2012 at 01:04 PM.
#12
I am not sure if this will affect your torque roll problem, but most of us with 19" XDs are running a 1" spacer. It will give you better all around performance, particularly with a 4 blade.
Good luck and keep us posted with your progress.
Regards,
Steve
Good luck and keep us posted with your progress.
Regards,
Steve
#13
Registered
Joined: Jun 2009
Posts: 426
Likes: 0
From: Kirkland, WA
my boat leans hard with a 30P 4 blade. Much better with a 29P 5 blade.
I ran a 31P labbed (One of Ned's) and that prop BY FAR made the boat run straight and true and with zero chine walk. My 4 blade 30 is like trying to stand on a beach ball at 80+.
I ran a 31P labbed (One of Ned's) and that prop BY FAR made the boat run straight and true and with zero chine walk. My 4 blade 30 is like trying to stand on a beach ball at 80+.



