Prop for Heat
 

Has anyone tried a Mirage 3 blade prop on a Heat with the 496HO ?

I would stick with the Bravo1 setup that the heats come with. The 3 blade I dont think would have enough bite to her, esp with the high X dimension Heats rock from the factory.

Ditto, and you might want to look into lowering the X to get better performance. There are a few here with good experience with that modification.

The best prop for my Heat was a blueprinted and slightly sharpened 24B1. The 26 was too tall and none of the labbing I had done to the 24 or 26 mattered.

Has anyone tried a revolution 4 on a heat? The biggest they make is a 25 pitch so that counts it out for people with more horesepower. It seemed to work well on my rage.

I have seen quite a few people run the Hydromotive setups on their Heats, I would check into them. The price isnt too outrageous, and the guys I have seen with them have quite a bit o power pushing them as well.