Looking for a flame
11-12-2012 | 03:15 PM
#11
Off the Radar
Joined: May 2001
Posts: 1,097
Likes: 1
From: Cape Coral, FL or Colonial Beach, VA
Dave from Salt Lake needed to put the larger tabs to keep his straight at 100. That was his Salt Lake speed with 588's. I think he said it made 742HP. What engines do you have?
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
Last edited by Linster; 11-12-2012 at 03:17 PM.
11-12-2012 | 08:51 PM
#12
Thread Starter
Never Enough
Joined: Apr 2005
Posts: 92
Likes: 0
From: .
Dave from Salt Lake needed to put the larger tabs to keep his straight at 100. That was his Salt Lake speed with 588's. I think he said it made 742HP. What engines do you have?
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
I did a mod to the 500EFI that made a dynoed 575HP. On a cool day the boat ran 95. Most others it was 92-93. That was spinning 30's 5800rpm
I have stock 525's w/ xr drive. I like the way it runs, but it does need bigger tabs IMHO. Here are the pics of the new electric bolsters I had installed 2 weeks ago. Same one they put in the new 39 just not as tall.
Last edited by Mhale00; 11-12-2012 at 08:56 PM.
11-12-2012 | 08:58 PM
#13
Thread Starter
Never Enough
Joined: Apr 2005
Posts: 92
Likes: 0
From: .
