New 35 Nordic
#11
Thread Starter
Registered
Joined: Sep 2001
Posts: 1,751
Likes: 11
From: Cincinnati Ohio
Indy, I was concerned about engine compartment space too but there is actually as much room as my 500's had. Nordic raised the engine hatch to allow for the taller headers seems to be plenty of room for normal maintenance.
Will keep you posted on speed numbers, the last 35 we sold with 525's ran 91.5 GPS with 15 hours and was on the limiters with 32 labs. We will see.
Will keep you posted on speed numbers, the last 35 we sold with 525's ran 91.5 GPS with 15 hours and was on the limiters with 32 labs. We will see.
#13
nice ride gary.. I need to stop by and checkout your Dealership. my next boat will be a nordic most likey a 35ft.. what kind of speeds you getting out of those 525's
Thanks Bill
Thanks Bill
#17
Gary, my mistake when I got home I checked my notes. I had 32 five blades, I've had so many props on this boat in the last 6 months. I now have 36 four blades hitting the limiters. Merc said it would be late this year before the 34 five blades would be done and out.
rv, It felt like the stern was pushing the bow into the water. Like Gary said too tall 15 5/8. 34 five blades @ 15 1/4 will do it for me I think.
rv, It felt like the stern was pushing the bow into the water. Like Gary said too tall 15 5/8. 34 five blades @ 15 1/4 will do it for me I think.
#18
Registered

Joined: Dec 2000
Posts: 1,239
Likes: 5
From: Loto, MO
Thanks for the replies on the 5 blades. Doesn't sound like they are the ticket yet for our Flames. Have any of you tried the Hydromotives P5X? I have heard good things about them on the Heat.
Dwane, what speed are you at with that rocket now days? Is it still handling the way it use to or are you getting it better with different props.
Rick
Dwane, what speed are you at with that rocket now days? Is it still handling the way it use to or are you getting it better with different props.
Rick
#19
Registered

Joined: Dec 2000
Posts: 1,239
Likes: 5
From: Loto, MO
Another question for you guys, what is your drive height. I would like to know what is the distance from the top of the notch in the transom to the bottom of the transom assy. (behind the flat anode). Ours is in the 6" range but I forgot so I will measure tomorrow and let you know so we can compare.
Rick
Rick


