All goes well tonight then yup thats the plan. Im leaving 8AM sharp sunday from Fall river or Somerset depending on what ramp is open. No matter what ill have a prop for you if thats going ot be an issue. Left and right hand take your pick.
-Mike

yea, i have my 22p 4 blade and my buddys bblades labbed 23, but both hit the rev limiter, and after testing my 4 blade 26 from bblades i think both the other props on my boat handle like worse, and slow the boat down.
i sent bblades an e-mail to see, but the prop should go out today/tomorrow and should be 3 days shipping. we'll see.

whats up which motor are you putting in, I think my boat will be up in maine in two weeks, trying to get the guy down here to pull the motor and tank this week.other wise we will pull it up there. get the glass work done put the blower motor in and konrad on so july looks good hahah.then need to decide what the new hull over the winter will be. sutphen 277/ banana 28/ joker 28/ y2k. and if a sut 32 is still not sold with power ,I am going ask if they will sell it without. I have not heard from steve if he went to get the AT to come up so, I may not be up after all on the 17th. mike did you get my PM call me.

if I make it up, I have a hydro 3 blade 24 and 26b1 labbed. you could try the 24 ran about 200rpm more than the 25mirage I had but the same speed.

Yeah Artie, brought the boat back yesterday.

ohy jons new boat should ready this weekend but late saturday so I think he is staying up there. boy did this come up quick

Seems all has gone well one little glitch but should be taken care of tomorrow.
-Mike

airtime, the big dawg props are for my buddys baja, he has a built up 454. not sure my boat will spin your props? its only a 375 hp 496. over revs with a 4 blade 22p over revs with bblades 23p 3 blade lab set up for my buddys 454 stock. not sure what you think? i have my bblades coming wednesday or so, i tested it already and picked up over 1 mph and was under reving about 300 rpm, so im hoping after brett tweaked it it should be good. not saying i wont try other props, just not sure what to try. im new to this go fast boat thing. i grew up on larger boats, 32 welcraft with twin inboards, 36 tiara with twin inboards, now a 37 riviera with twin inboards. cummings tho, and man thats nice.
this is only my 2nd season messing with go fast, i drove my dads 272 baja and his 25 outlaw for years, but never messed with them. this is my first go fast. my last 2 boats where an 18' welcraft fish with a 120 outboard and then a 20' stingray with a 4.3 I/O so this in my cherry popper, i look towards you guys for help.

Ya my boat should be together by the end of this weekend. Hope to go up to the shop this evening and get my water pick ups that I had welded up and got off the phone last night with the guy doing my swim pad and he said it is almost done. If the weather is nice we should be able to finish buffing it out and waxing things. Can't wait to have it done and drop it back in the water.

I was out yesterday boy felt good even if it was only for 10-15minutes hopefully getting back out one more time today before our run this weekend (providing everything goes well and accorinding to plan.
-Mike