WTB or build 502/454
 

Does anyone know of someone looking to unload a 502 or 454, or can some one reffer a good local shop to freshen up a 454 MAG. Thanks Happy Thanksgiving

If your looking for someone close, there is Tom Caughlin machine in Canton MA. Does a very good job and don't rake over the coals on the price.
Mike

Thanks do you know how I could contact him does he have a shop Thanks again

Matt

Give Caughlin a shout! They have done alot of motors running in Sutphens up around here!

Still looking to freshen up or buy a motor before the season. I have a 454 mag anyone looking for some work or have something to sell ?? let me know

Matt

Hey Matt, I have a 468 short block with about 40 hours on it. All forged internals. Engine made 580 HP with Merlin iron heads and a single carb. It's low comp, 8.5:1 and can be run or reg gas and also a blower which I also have available. Looking to get $2500. for the short block and $3K for the blower if your interested. I can also hook you up with all of the rest of the parts you would need, price depending on what you wanted in heads, cam intake etc.

What would you be looking for the long block?

I only have the short block here. I can get you another set of Merlin heads and another cam set up but price would depend on what you wanted in heads and cam. Give me a call and we can discuss some options. Bill Redmond 215-768-4172

Give Jc Performance a call he made 515hp out of my 454 mag efi & it idled at 800 rpm.