First day out!...Whos in???
 

Well, here we go again!:eek: Looks like its gonna be nice on Saturday. River is receding everyday. Outlaw33 is ready to test his rebuilds and I wanna be out there in case he has a problem. I know Jeff is ready for a boat run, anyone else? Not sure if Outlaw33 is going in the river or ocean yet, but it will be a day on the water either way. I say tow to OS and dump them in the in the ocean, but thats just me. I mean, Claudios needs us! :ernaehrung004:

I know the weather can change a lot between now and then so planning this time of year is tough, but last I checked the forecast appeared to be clear and mid 50's on the water... I dont know how busy Claudios would be?!?!

we wont be ready...the weather is limiting our ability to actually go out and work on the boat. everyday has had some form of precipitation. we'll see how this week goes weatherwise but so far it looks like thunderstorms everyday.

Jeff??? :party-smiley-004: Where are you?

Been busy looking at planes!

I am ready to get out and do some boating though. JUst havent had a chance to get the boat pulled out. but everything is ready to rock and roll!

Ok, just talked to Jeff and hes prolly in.......so far,Nellie and I, Robb and Kelly(Skater)and Johnboy(Outlaw) and Jeff (Sutphen boy) meeting for a Saturday ride around 11 AM. If anyone else interested, let me know. The more the merrier.

I'll come down and say hello, as my engines are still out...

Someone needs to step up and buy my damn hull....

I wont be legal so I'm out too, otherwise I'd take you out with me Pat. Next time!

Take your time, remember, the river and sound is still full of ****, you're in a different ball park now buddy...whacking **** with heavy artillery is no longer an oops matter....it'll make a grown man cry at the damage... ;)


Thanks Scott!

Haven't even started my boat yet.....but may stop down and say "Hi" at the launch. You guys launching at Saybrook????

You and I can sit back and sip cocktails while we give everyone a send off...:lolhit:

Yes ......the middle finger! :eek:

Scot....bring the Viper down and I'll bring the Vette and we can do doughnuts for the DEP!! ha!

Yeah, sipping away at cocktails with Pat, and doing doughnuts with you in the DEP parking lot... I can see that would end real well. Might as well have Adam bring a backhoe for good measure! :lolhit:

Anyone checked weather yet? Is that the same day as mass run?

Great line Scot Sh!t that mad my day. And Hey Scot I can make you Legal in a sec. I have a Boat Dealer Plate!
Anyone need a Hand cafe is about 3 weeks out
-Mike

Does it work on a boat too? :eek:

Ha ha that was awesome!

Mike nice avatar that thing looks fast :drink:

Scot its a Boat Dealer plate 100% legal my friend.
-Mike

My buddy KIKO ran on a seaboards dealer plate for many years with his 30 sut. Never once got pulled over!

But we all know that Scot wouldn't be that lucky......and he'd end up like Adam! :eek: :party-smiley-004:

Speaking of which, I hope Adam made out okay in court yesterday... :(

Thats funny sh!t guys!....lookin forward to Saturdays trial run. Unfortunately, marine forcast says 1 foot or less! Daauum! Oh well, maybe Jeff will be able to get on top of um' and show off that poker run hull...just watch out for the Skater Jeff:eek:

Those are perfect 32a Skater conditions! That Skater and Jeff's Sutphen love those 2' or less conditions. :cool: You might have to bring everyone over to Plum Gut to even the odds Kevin. ;) If not, you could always hope for glass like conditions and watch the 'show'. :eek:


BTW, I know you mentioned it to me, but what does Johnboy's Baja have in it now?

1 foot or less is great for Kevs boat most of the time barges sit waiting in harbors tied to the dock waiting to be towed so its used to those conditions.

Kev do you have the $650 for fuel that barge is gonna burn on sat?

I have something I need to do on my boat before I can get out. Hope I can get it done before then, I have jobs lined up all week this week.

Its ok, with flat conditions, Im ok with watching the 'show' and I shouldnt beat it up yet anyway. Just gonna burn off old gas....Johnboy still has 502 CI but now with AFR alum heads, CMI exhaust, bigger cams, and remapped computers. Should make around.....mmmm....1101 HP each ;)

:lolhit:


Everything okay? Hopefully not related to the new lowers...


We need the name of his engine builder!!! :eek:

Make it happen Mr. CPBA president.....A few posts ago, you were "all set and ready to go!" What happened?, Did the windshield magnify the sun and melt your interior? The Mexican nightmare that it is????:lolhit: Or, we can call Sick and he'll french fry to your house and fix it for you....again:eek:

Actually Jeff.....NO !!!! I dont have an extra 650.00 bucks, but I will make it happen. :kiss:

At least you're throwing it in Old Saybrook.....that'll save ya $100 bucks Kev! :lolhit:

Although towing that beast can't be too cheap either!!!!! :party-smiley-004: I hope the Kenworth is ready to roll Kev! What the hell are you towing "Moby Dick" with?????

Towing the whale with a 2500 Dodge Mega-cab with a Hemi. Not my first choice, but was 10K cheaper than a diesel. I dont have Scots money, so it will have to do! Hell, I could commit suicide jumping off Scots wallet. :evilb:

Joke all you want, that b!tch is really thin these days! Gotta sell some cars and a boat before I can eat anything other than bread and crackers! :eek:

Mine is a diesel, but it towed the 37 without too much effort. My engines, trans, drives and trailer are heavier, but your bare hull probably offsets that. The trans (torque converter) wasn't all that happy about it though coming out of the hole! :eek: Hopefully yours is a little better in this regard. Once the TC was locked, it was a dream... didnt even miss having DRW.

No my issue has nothing to do with the lowers, It has to do with my truck. I had a back brake dragging and was getting ht so I did a new caliper and rotor on that side but Snapped the bleeder on the other side so I am going to change that whole set up now too.

I thought I was all set with the boat too, but I forgot I need to put a shut off on the lines for the pump out, The water intake needs seals , so I am just going to shut it off!!

I need to charge the batteries and clean the connections too.

:) Not too bad.......

Claudios Is Now Open
 

Hey, Claudios opens TODAY! Just called and talked to their answering machine. Weather looks nice this weekend with Saturday conditions at 1 to 2 ft. Jayfan should fire that Formula up on Friday and come out on Saturday!......Oh wait, he prolly has to either wax the Vette(again) or go wedding dress shopping.:party-smiley-004:

Why are you "talking to an anwering machine"????? :party-smiley-004:

Going to work on the boat this weekend......hopefully ready next weekend.....just for you Kev! :grinser010:

Hey that sounds great Jay! Im talking to answering machines cause Im going friggin crazy this winter!....but Im starting to feel better :boat:

Jeff im ridin with you. Need get my drinks mixed well, for some reason your boat would do better then a Blender.
-Mike

Great! Sick is in too! Jeff better get to workin on that brake system! Gonna be a good day.:drink:

Good point, Dramamine needs a chaser! :lolhit:


You guys are really making me want to blow off all the work I know I should be doing on Sat.! :grinser010: