Here We Go Again III
#42
Registered
iTrader: (2)
Have a light misfire in that engine now, but it has been there throughout this issue. Couple boots on the plug wires don't look so great, so I ordered 2 new sets today. With the misfire it would only pull 4400-4600 rpm and topped out at 63.3, cruise at 3800 was 50.8, may have to reprop now that they have more bite
#43
Registered
I had the same problem with my Powerplay and it ended up being 1 stupid connector going to the MSD box....chased it all summer. Wouldnt do it at idle, so trouble shooting was not easy. Pull all that crap off and put these on....
http://www.performancedistributors.com/marinedui.htm
http://www.performancedistributors.com/marinedui.htm
#47
Registered
iTrader: (2)
Have a light misfire in that engine now, but it has been there throughout this issue. Couple boots on the plug wires don't look so great, so I ordered 2 new sets today. With the misfire it would only pull 4400-4600 rpm and topped out at 63.3, cruise at 3800 was 50.8, may have to reprop now that they have more bite
#49
Can You Hear Me Now??
Gold Member
Thread Starter
Happy first day of summer! I think this is the slowest start to a season I have ever seen. I will be out Friday but I have plans that I am told don't include boating for the rest of the weekend. But next week I gotta go somewhere.... Block,Montauk or Port Jeff. You boys better get your boats in the water let's go! I still have a few little items, but hopefully most will be done in a week or two. So who is in and ready to go???