Engine swap
Hello all, I just put my mercury tower of power up for sale and I did this so I may be able to upgrade the mercury 165 on the HiLiner 222 does anyone know what I can replace the 165 with I want to keep it inboard out board, I’m thinking something along the chris craft or sea ray Line might have a direct bolt in mercury. Any help greatly appreciated.
|
I saw a post not here that suggests that a mercury 4.3 l would go with my Altima and bolt right up is anyone knowledgeable about this and can help me
|
Originally Posted by M A
(Post 4752288)
I saw a post not here that suggests that a mercury 4.3 l would go with my Altima and bolt right up is anyone knowledgeable about this and can help me
|
I didn’t say anything about a Nissan altima
|
I didn’t say anything about a Nissan Altima
|
The 165 is an inline 6 motor...not matter what you go to, anything other than another inline 6 will require you to do a bit of work to retrofit it. New motor mounts...new bell-housing to bolt up to transom assembly, possibly different wiring harness etc....its not going to be a direct swap and call it a day kind of situation....
|
Ok cool so stay with an in-line six, bayliner ran with inline sixes in the 90s right.
|
Hey Wally any suggestions as to what motor I should be looking at I wanna stay in the 2000.00 range
|
Originally Posted by M A
(Post 4752372)
Hey Wally any suggestions as to what motor I should be looking at I wanna stay in the 2000.00 range
|
Originally Posted by M A
(Post 4752372)
Hey Wally any suggestions as to what motor I should be looking at I wanna stay in the 2000.00 range
|
All times are GMT -5. The time now is 10:52 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.