Brad and his sawzall projects
#1
Registered
Thread Starter
Join Date: Oct 2003
Location: Chicago, Illinois
Posts: 3,254
Likes: 0
Received 0 Likes
on
0 Posts
Brad and his sawzall projects
This is a warning. Do not try this at home unless your name is Brad Zastrow. Here is what you do with a zawsall and a raceboat.
Brad is making it so he can put the top back on when he is poker running.
Brad is making it so he can put the top back on when he is poker running.
Last edited by MarkSmith; 11-09-2005 at 06:51 PM.
#2
Registered
Thread Starter
Join Date: Oct 2003
Location: Chicago, Illinois
Posts: 3,254
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brad and his sawzall projects
Here are some of his other boats that are complete. A man and his toys. The motion cat is a former closed canopy raceboat. Notice the 5 point harnesses and oxygen.
#4
Registered
Re: Brad and his sawzall projects
Yeah Brian, I saw some of the jigsaw puzzle pieces in your dad's garage! If a sawzall is truely your preferred tool, maybe I DON'T want you helping me out this winter!
#6
10x
VIP Member
Re: Brad and his sawzall projects
Originally Posted by Doug
Mike, even if you cut the beak off it still will not look or ride like a Cigarette.
__________________
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
Fountain powerboats rule "The Preacher"
Chicago Powerboat Club Director
[email protected]
www.chicagopowerboat.com
#7
Re: Brad and his sawzall projects
Looks good so far. Looks like he is copping the CRC race boat conversion. I would like to see what it would look like if you took the top out including the front hatch, but left a margin of fiberglass all the way around. Similiar to the OL GTX with removeabel canapy
#9
Registered
Thread Starter
Join Date: Oct 2003
Location: Chicago, Illinois
Posts: 3,254
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brad and his sawzall projects
Originally Posted by 42MTI
Looks good so far. Looks like he is copping the CRC race boat conversion. I would like to see what it would look like if you took the top out including the front hatch, but left a margin of fiberglass all the way around. Similiar to the OL GTX with removeabel canapy
Its good to leave the hatch. In case you can't get out of the big hole on the top, you still have the hatch.
#10
Registered
Re: Brad and his sawzall projects
The 25 Warlock was a race boat also. I converted that one two years ago. Some before and after pictures. This was a very tough project. Notice the console and rumble seat in the before. Black Interior !!