Re: Finally done
 

Here is a 39OE with diesels and Arnesens

Mark Smith

Re: Finally done
 

Hi Mark !

The world is not so big,this is my boat.
It`s a bad pictures of the boat,the guy beefore me had
diesels in it,but he never change the gear ratio in the
Arnesons, he never got this right,It`s still the gas gear
ratios in the Arnesons from the time the boat had
big V8`s. I have to do this right,not only trying difrent
props,you know that`s never a happy ending.

502Magnum

Re: Finally done
 

Try Rik at www.arnesonindustries.com

He is the big US rep. Twindisc in Racine, Wisconsin may have a local distributor for these parts in Norway. Diesels could be a great set-up. The 2 speed trans set-up might be the answer to get it on plane. What does the boat weight with Yanmars in the boat? I heard 2000 hours between tune-ups.

Mark

Re: Finally done
 

I have a full extra set the 1:1's, gears, ratios sleeves, extra shafts, and 4 balde Rollas.

Re: Finally done
 

I also have the chains. Also there were two speeds in mine and I changed them back. If you do not have a lead on the trannies let me know. It moves the engines forward quite a bit.

Re: Finally done
 

Expresscat39 and Mark,thanks for friendly replys, I`m a gas motor man,
but I`ll give these 2 Yanmars a try,thanks for the adress Mark,and yes
they say the Yanmar 6LY2-STE`s are good motors.Expresscat39,it
sounds good to me aboat the gears,I`ll PM you.

502 Magnum

Re: Finally done
 

http://www.offshoreonly.com/forums/s...6&page=2&pp=30

Bjorn, here is an old thrread. Start at this point and read through.

Re: Finally done
 

Hi Dennis ! Yea,I know this,but some stuff here is not
accurate,I think it can work prety good if I do it
right,but I know its not big V8`s.Have a good time.

Bjorn