Birth of Krytonite F1 race boat!!
03-24-2003, 03:46 PM
#114
Registered
Join Date: Oct 2002
Location: Quogue, NY
Posts: 2,907
Likes: 0
Received 0 Likes
on
0 Posts
+++ TOP SECRET "Candy" +++ NOFORN +++ OPERATIONAL IMMEDIATE +++
The deck is being hoisted into place. This is how it will look when Randy and Glen go through a tight turn.
The deck is being hoisted into place. This is how it will look when Randy and Glen go through a tight turn.
03-24-2003, 06:30 PM
#119
Registered
Thread Starter
Now the hard part, the dash and interior layout. All the rest becomes a custom setup. The cockpit will be very similar to my last boat. Everyone has there own way they feel most comfortable in there cockpit. Krytonite will work with you on a individual bases but the more you modify the more you pay. Its good to work with someone like Kirk that will build to your spec.
I have decided to go with the smartcraft gages for the dash.The steering is still undecided as to witch manufacturing system we will use. (I was hoping for some sponsorship rigging products.) The merc 420 sport tabs are in and will be mounted in the traditional way. Until someone can convince me that horizontal mounting is better. We have also upgraded the pumps to the heavy duty ones with metal canisters and better mounting hardware. The motor hatch has not yet been completely designed. The Merc. 525 EFI will be mounted with front and rear racing motor mounts. The seats are made in house and will be there sit-down wrap around snug style (love them) headrest will be smaller than last years but feel they are worth having.
If anyone has additional ideas now is the time to speak up.
Randy
I have decided to go with the smartcraft gages for the dash.The steering is still undecided as to witch manufacturing system we will use. (I was hoping for some sponsorship rigging products.) The merc 420 sport tabs are in and will be mounted in the traditional way. Until someone can convince me that horizontal mounting is better. We have also upgraded the pumps to the heavy duty ones with metal canisters and better mounting hardware. The motor hatch has not yet been completely designed. The Merc. 525 EFI will be mounted with front and rear racing motor mounts. The seats are made in house and will be there sit-down wrap around snug style (love them) headrest will be smaller than last years but feel they are worth having.
If anyone has additional ideas now is the time to speak up.
Randy
03-25-2003, 04:32 AM
#120
Charter Member#203
Charter Member
Join Date: Oct 2000
Location: Ft.Myers, Fl/ Atlanta, Ga/ Worldwide
Posts: 19,476
Received 14,927 Likes
on
3,851 Posts
Custom Flag holders???
