How to build a canopy lid in 12 easy steps..
 

Step 1: Ask Ryan Beckley.. this save a **** load of time. :drink:
http://i44.tinypic.com/2zrpyea.jpg


We than took a think plastic sheet and bent it over the opening to make a part from.
http://i44.tinypic.com/okamiv.jpg


I Than laid a sheet of cloth over the part to help it hold it's shape after I un-screwd it.
http://i44.tinypic.com/261kwa1.jpg

We than took the parts and wraped them with 5 or 6 sheets of cloth and some expoy thats pretty strong (and pricey)
http://i39.tinypic.com/2vcar5t.jpg

The black line is were the finish part will be cut to
http://i39.tinypic.com/2h8d7p1.jpg

I Than took a router and cut the notch for the lid to sit into. I drilled a guide bolt into the base of the router so I could set my width. Check all the canopy dust..
http://i44.tinypic.com/23t16pl.jpg

Fits perfect!, Now I just need some hardware (on the way) - and finish paint..
http://i43.tinypic.com/zup6rb.jpg

:drink:

http://i41.tinypic.com/okzb4y.jpg

http://i39.tinypic.com/x2uk5g.jpg

Thanks to Ryan, Glassdave, Sparky and Chris.

Looks good Rick.

Nice Job!!! Glad to try to help a little.

AND WHO TOLD U THE TRICK WITH THE ROUTER ?????:eek:

LOOKS NICE !!!!

Thats right, you did..

Not bad for a crazy german SCHULZI ,mmmhhh ?! LOL

I am happy everything worked for ya,,,so know i can kick your a$$ in class 4 without getting u wet !!!!:grinser010:

Update : We did a little body work and finished them off

http://i43.tinypic.com/2yl6053.jpg
http://i43.tinypic.com/2m4cefq.jpg

Than we sanded the top area and masked it off for paint.
http://i41.tinypic.com/2znyfr8.jpg