Fastest Outerlimits
11-25-2007, 03:31 PM
#11
Registered
Platinum MemberJoin Date: Feb 2005
Location: Huntersville,NC
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Thanx I would not go back to standing now & I only have about 15-20 hours in AFU (which is my 1st sit-down). To me you feel more like your part of the boat & it's also feels very much like your driving a car. My boat with the orange dash I get a little glare on real sunny days though other than the glare which would go away with a dark dash top it is more natural to me then standing.
11-29-2007, 02:33 PM
#12
Registered
Join Date: Jun 2004
Location: Utica, Ny
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
what ever happened to Bob Russell. I havent heard his name in over a year. We spoke w/ him and Paul Fiore in the 1000 isles run in August 2006 and he said his new 50 cat would be ready by the following spring but nothing ever camr about.
12-04-2007, 08:03 AM
#14
Registered
Join Date: Jan 2003
Location: Lansing, MI
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
I witnessed his motors on the dyno. DOHC custom EFI motors from Tim Grose. The 93 octane combo hit 1,479hp The exact same combo with ONLY changing blower pulleys and the supply line to methanol boiled the dyno water at 2,100 something!
Just checked it out. One of the earier dyno sessions is still on You Tube:
http://www.youtube.com/watch?v=eQwvSbQFA9U
Type in his name and you'll something really wild.
Just checked it out. One of the earier dyno sessions is still on You Tube:
http://www.youtube.com/watch?v=eQwvSbQFA9U
Type in his name and you'll something really wild.
12-04-2007, 10:11 AM
#15
Gold Member
Gold Member
I witnessed his motors on the dyno. DOHC custom EFI motors from Tim Grose. The 93 octane combo hit 1,479hp The exact same combo with ONLY changing blower pulleys and the supply line to methanol boiled the dyno water at 2,100 something!
Just checked it out. One of the earier dyno sessions is still on You Tube:
http://www.youtube.com/watch?v=eQwvSbQFA9U
Type in his name and you'll something really wild.
Just checked it out. One of the earier dyno sessions is still on You Tube:
http://www.youtube.com/watch?v=eQwvSbQFA9U
Type in his name and you'll something really wild.
I was thinking it was going to be a toad, and just then the digital version of the analog hp guage, wrapped around and went to 1400+.
Does that thing have hemispherical heads?
12-05-2007, 04:10 PM
#20
Registered
Platinum MemberJoin Date: Feb 2005
Location: Huntersville,NC
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
I bet they last as long as 1100 Sterlings. The biggest issue with big blocks is the valvetrain. We work real hard on the Nascar stuff cause without overhead cams there is alot going on in the top end of the motor & that's usually where the problems start. As long as you keep good oil & prime the motors after they set a while & don't beat on them with cold oil the bottom ends are pretty solid.
