![]() |
Re: Prop Testing on 24
Originally Posted by Stormrider
Will a labbed 24 get less cruise than a stock 24B1?
From my experience, it is better to test with stock props. Pick what works best stock, then tweak for that last 1-2mph. "Labbed" props don't always work better. It may take a few tries... |
Re: Prop Testing on 24
Tested the 22B1 this weekend.
Not Good. :mad: Got up on plane a bit easier, and was able to take more trim. But I lost 2 mph at cruise speed, and lost 3mph top end. And I cant tell if I like the 4 blade better than the 3, maybe since I'm so used to the 3blade Mir +. |
Re: Prop Testing on 24
Originally Posted by Stormrider
Tested the 22B1 this weekend.
Not Good. :mad: Got up on plane a bit easier, and was able to take more trim. But I lost 2 mph at cruise speed, and lost 3mph top end. And I cant tell if I like the 4 blade better than the 3, maybe since I'm so used to the 3blade Mir +. You are going to loose speed with a 22p at the same rpm. You need to try a stock 24p Bravo 1. You should gain a little cruising speed but will not likely on top. The Bravo 1 is a better rough water prop in my opinion though. |
Re: Prop Testing on 24
I'm waiting for the demo shop to call me when the 24B1 comes available.
In the meantime, I'm bringing the boat to the southshore for some oceanrunningfun... finally! :evilb: :evilb: |
| All times are GMT -5. The time now is 06:35 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.