vr6maniac

Hi Tim;
I have to get Photo shop to down size the photos...but I took hundreds from the day we pulled the motors. We were lucky if the motors were putting out 350 hp,when we purchased the boat...in April the oil pressure in the one "bad" motor was running at 25 lbs...until finally the computer wouldn't let it run anymore.The gentleman that installed your stainless marine exhaust did all our rigging. I'm extremely happy with the end result. I don't believe the original drives would have lived very long.Jo has told me that "Cherry Bomb" is running 92 with 500EFI's and stock XZ's, no sportmasters...We have to find the right props !!! Call me, we'll take you out, as long as you get your tears on the deck....You won't recognize the boat.The only thing thats original is the straps that hold the cabin doors open.

vr6maniac

Here's a pic of the 500EFI's...In away it was good my 502 mag mpi's got lost at the engine builders shop in Katrina,the only down side, is that Ron Sporl doesn't want to return my $7000.00 deposit I sent him for the rebuilds he didn't do....BEWARE !!

speed buff

nice

tomcei

Post #41
where did you get that hatch lift? It looks like what I need. Is that a wheel on the end that rolls as the hatch opens?

509 SC

Tomcei, I beleive the hatch lift your refering to is on the 30' Cig, give Skip a call, you can probably get one for about 5 grand Steve

tomcei

I'll just dig that out of my ash tray

mikebrls

Happy Holiday's

talon25

Hey Mike ,

what did you ever wind up running on your boat for a prop ?

mikebrls

Im Runing A 26 Pitch Bravo 4 Blade Now.
Im Going To Have It Labed For A Litle Beter Performance. I Would Like To Try A 28 Labed Just For Cruising Around .would Probly Have A Good Cruiseing R.p.m .but It Will Be To Big For Any Top Speed Runs.any Body Down In South Florida Have A 28 Labed I Can Try For A Day .
Thanks
Mike

JO - PANTERABOATS

Here is Mike "looking good" last weekend at stiltsville.