BRUCE SEROFF

Well...... I finally have a sale pending on my 28 and the buyer has his own power.

So....with that said, I have a fresh 565ci motor completely dressed ready to drop in.
brand new coupler, high torque starter, high perf water pump, power steering pump, msd ign., stainless marine
GEN III dry exhaust.

The motor has been completely remachined and rebuilt.

it will be dynoed with sheets avail. it is expected to make somewhere in the high 600hp range.

anyone interested can email me at [email protected]

BRUCE SEROFF

.

BRUCE SEROFF

BRUCE SEROFF

pics before rebuild

IRONMAN

How did it run in the 28 before the rebuild? Is that a 9.8 deck block?

Stormrider

Will it run on 93?

thedonz

Man that backyard looks very familiar......that engine is BADA$$ i saw that engine being built every sec. That's a Miami Boyz engine ( Albert ) and i will tell you he builts and performs his owns stunts and never but never has his engines fuked up . Every time we take out his bad boy (920ish hp) it never but never gives a problem, always ready for the following weekend. Who ever buys this baby will have a very reliable motor, it was built with top notch stuff and built by a badass person. It sound like a mean sob .

jr Mike

MIAMIBOYZ

It will run on 93 all day long, this was my original motor from when I raced the Pantera in 04`. I re- freshened the motor for Bruce, it is now on stand by to jump on Mesas dyno when my turn is up. This motor is balanced and blue printed by Mesa and built by yours truly.

MIAMIBOYZ

[QUOTE=thedonz]Man that backyard looks very familiar......that engine is BADA$$ i saw that engine being built every sec. That's a Miami Boyz engine ( Albert ) and i will tell you he builts and performs his owns stunts and never but never has his engines fuked up . Every time we take out his bad boy (920ish hp) it never but never gives a problem, always ready for the following weekend. Who ever buys this baby will have a very reliable motor, it was built with top notch stuff and built by a badass person. It sound like a mean sob .

jr Mike[/QUOTE


Thanks Mike

MIAMIBOYZ

Ran 83 with a 26` labbed Hydromotive quad 4,15-1/2 diameter. It is a standard deck Merlin 2 with Dart 360`s aluminum heads fully ported with new springs/titaneum retainers and 2.30 Manley intake valves and 1.90 inconel exhaust Manley valves. New Manley flat top 4.600 bore pistons. This motor should make 680 good enough to push any pleasure 28 Pantera over 80.