Re: Rub Rail on a 24
 

nice

Re: Rub Rail on a 24
 

Thanks Let me know if you see something that is screwed up or can be inproved alot of this is geuss work and things I have seeing on the internet.

Re: Rub Rail on a 24
 

Todd, your story is just like mine. Mine is an 80' also. When I bought it it was in pretty rough shape, but things are coming around now. The previous owner "rigged" everything including duct tape to keep the water from coming in the starboard exhaust pipe! All it needed was a new o-ring seal.

Good luck with your project!

Shawn

Re: Rub Rail on a 24
 

I've found that it's all guess work in some form or another. Study the others, learn why, and then do it your way. I think it looks awsome :cool:

tg,
I saw your post on cleat placement, and realizing yousr is the same year as mine, I did a quick search.
Your boat looks great, glad you're getting back on the project.
Mine is moving along slowly, but it'll be ready when it's ready.
Did you finish the rub-rail yet??

bouyhunter
My rub rail 98% done I have about 7 hours on the boat Manley test runs and still have a lot of lose ends.

I know what you mean.
I have several portions of the project 95-98% done, but they aren't "done".
Can I ask you...
What did you do to extend the dash panel for the throttles??
I'm installing the same package of throttle/shifter, and it's a 1/4" longer than the spot on the dash.
Your's looks good - what did you have to do??
Looks like you built it out with a pad.