|
jeff, you still runnin the 23+?
|
Originally Posted by Stormrider
(Post 2279933)
jeff, you still runnin the 23+?
I also have a 25" Mirage that I've been wanting to try. ;) I think once it cools down a bit I'm gonna find the 25" is the right prop for speed. :cool-smiley-027: |
remember to keep the rpms in the upper 5s.
i bet a labbed 25mir+ would be tits. come on! i wanna see that package run 80+. always thought it could. |
Originally Posted by IRONMAN
(Post 2279605)
It makes no sense that you could spin the 28 at 5000 and now only spin the 26 at 4650. Have you tried any Mirage Props? They typically work well on the 7' beam boats if your drive height will allow it.
|
Originally Posted by ziemer
(Post 2279660)
Sounds like the hook in the bottom had a lot to do with it. The hook will push the bow down and potentially lift the rear which can cause the prop to slip more.
Does the bow seem to carry better now? You're now at about a 12% slip which is pretty good especially with a bravo. I would try a Mirage too, just to see if there's a difference. Maybe try to find a regular ol' 25 Mirage and see what it does. |
If you can try the Bravo126 and a Mirage+25 and a Plain Mirage25 on the same day, You will probably find the plain M to be faster like Ziemer said if it will get on plane.
|
Originally Posted by IRONMAN
(Post 2280456)
If you can try the Bravo126 and a Mirage+25 and a Plain Mirage25 on the same day, You will probably find the plain M to be faster like Ziemer said if it will get on plane.
|
Any updates?
|
Hey guys ,poped a blade on my 26 labbbed. Has anyone tryied a high 5 on a 24? The 26 had 3/4 cut out dia. x dim. 17.5 was running 82 @5400. Have not tryed any 3 blades. Need some info RICHIE.
|
No high 5, not enough blade area, T-Mone runs a P5-X though.
http://www.offshoreonly.com/forums/s...=131995&page=5 |
| All times are GMT -5. The time now is 09:31 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.