Latest Creation : "Black Pearl" Pantera 24' SE pics.
07-13-2007 | 08:37 PM
#41
Thread Starter
Registered
Joined: Mar 2001
Posts: 2,804
Likes: 4
From: Miami,FL. USA
Hi Jeff,
Between the engine stringers and the chine of the boat we have 2 small bulkheads in the engine room on each side. We mounted the actuator there since we had no room in the rear bulkhead with the 496 HO and the CMI headers.I will try and post a better picture on Monday.It worked out fine.
The Black Pearl Graphic was just installed on the hull sides and my customer will be out enjoying his new Pantera 24' with his family for the 1st time this Sunday here in Miami.
JO
Between the engine stringers and the chine of the boat we have 2 small bulkheads in the engine room on each side. We mounted the actuator there since we had no room in the rear bulkhead with the 496 HO and the CMI headers.I will try and post a better picture on Monday.It worked out fine.
The Black Pearl Graphic was just installed on the hull sides and my customer will be out enjoying his new Pantera 24' with his family for the 1st time this Sunday here in Miami.
JO
Last edited by JO - PANTERABOATS; 07-13-2007 at 08:47 PM.
07-19-2007 | 02:44 PM
#43
Gold Member
Joined: Apr 2006
Posts: 1,479
Likes: 5
From: St. Cloud, FL
Hi Jeff,
Between the engine stringers and the chine of the boat we have 2 small bulkheads in the engine room on each side. We mounted the actuator there since we had no room in the rear bulkhead with the 496 HO and the CMI headers.I will try and post a better picture on Monday.It worked out fine.
Between the engine stringers and the chine of the boat we have 2 small bulkheads in the engine room on each side. We mounted the actuator there since we had no room in the rear bulkhead with the 496 HO and the CMI headers.I will try and post a better picture on Monday.It worked out fine.
Thanks!
07-20-2007 | 09:48 AM
#47
Gold Member
Joined: Apr 2006
Posts: 1,479
Likes: 5
From: St. Cloud, FL
I've used those pics many times from your old Kodak gallery. I was talking with a guy at Stainless marine a couple weeks back and sent him a couple from that same gallery. 
07-20-2007 | 01:51 PM
#48
Registered
Joined: Mar 2007
Posts: 27
Likes: 0
From: Louisiana
Jo the black hull is awsome. Don't see any black hulls where I am. Down in Louisiana, the theory is that due to the heat index and humidity the a black hull would get so hot you could fry an egg on the bow. Is there any truth to that or are the cajuns down here full of too much s**t. Me personaly, a black hulled boat is the end all be all.
07-20-2007 | 03:05 PM
#49
JC Performance Engines
Joined: Jul 2002
Posts: 8,904
Likes: 34
From: Long Island, NY
