|
1 Attachment(s)
I added my company logo in a couple spots on the boat since I left all of the other race sponsorship graphics. This is the only decent shot I have here at the office.
|
Looking good, Dan! Can't wait to see the whole thing!
|
Originally Posted by p729lws
(Post 2399852)
The Mig is getting closer to being back on the water:cool: The bolster is back in and I'm working on the layout of the supports for the seats. The position of the drivers seat in the second photos is pretty close to the final seat height. The throttles should go in this week and if I get a package from Stainless Marine the motor should fire off next week. It's time to start looking for test props.
Dan |
Originally Posted by mikeb4
(Post 2455590)
Nice seats! very well done ..... bummer on the drive but the right time to find that out vs on the water.:(
Dan |
Originally Posted by p729lws
(Post 2455652)
Thanks Mike. I still need to get the boat home so I can work out the supports for the seat bottoms. I'm hoping the drive is back together today as the weather is looking good this weekend, but we'll see.
Dan |
2 Attachment(s)
She’s getting close Mike. I picked up the drive from Precision Marine in New Orleans this afternoon and it will be at the shop in the morning. Hopefully the Pantera will be at the house this weekend. I’ve been playing w/ the graphics but it’s a work in progress. I had the logo and eyes done in fluorescent green but the eyes didn’t turn out well so I had them removed. I had another company redo the eyes and they look better but now I have 2 shades of green. I think I’m going to roll like this for the summer and revisit it in the fall. Hope to have some more photos or video up this weekend but its blowing like **** outside right now so who knows…..
Dan |
Dan the Mig is looking good, keep us posted, very sorry to hear about the drive issue.
|
No worries Albert, just part of buying used boats:cool-smiley-011:
Tried to run it this weekend but ran into an issue w/ the clamp that holds the throttle cable to the intake near the throttle body and ended up w/ no throttle control. :angry-smiley-038: For some reason the wife was not willing to ride in the bilge and work the throttle body:evilb: The new parts are ordered and the throttle cable is temporarily rigged in the mean time, just waiting on free time and acceptable weather to try again... [YOUTUBE]http://www.youtube.com/watch?v=w2GRoN1IcnQ[/YOUTUBE] Dan |
Originally Posted by p729lws
(Post 2498683)
The new parts are ordered and the throttle cable is temporarily rigged in the mean time, just waiting on free time and acceptable weather to try again...
Dan |
Hadn't heard anything about the ol' Mig in a while and wondered how she's doin'?
|
| All times are GMT -5. The time now is 12:09 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.