Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Pantera (https://www.offshoreonly.com/forums/pantera-39/)
-   -   Anyone looking for a nice 24??? (https://www.offshoreonly.com/forums/pantera/197904-anyone-looking-nice-24-a.html)

NoGas 12-04-2008 10:59 AM

I've had a few bad experiences with performance boats and decided to take a break. I got back into "sailboat racing" (I know...oxymoron!!!) and hence the screen name change. Felt silly being known as NORTECH380 without owning a Nortech any longer. The Lightning in my profile is actually a sailboat and not a "beak boat". Just had some insider fun with that...

I've got a flats fishing boat these days with a 250XS that keeps me interested. I'd like to get something else but I lost a good chunk of change on a new boat deposit from some well-known builders in Miami which left a sour taste in my mouth(NOT Pantera).

Hope all is going well.

MB

ziemer 12-10-2008 06:20 PM

Fired her up on the hose today. Damn that big block sounds good. :evilb: :evilb:

Hasn't been run in 2-3 months and it started right up. :drink: Still an outboard guy down deep, but you can't ever get enough of that staight pipe sound, I don't care who you are. :ernaehrung004:

Stormrider 12-11-2008 08:40 AM

jeff, you done much to the engine? or still the same.

ziemer 12-11-2008 09:48 AM


Originally Posted by Stormrider (Post 2757245)
jeff, you done much to the engine? or still the same.

Put gas in it. :evilb:

Haven't done too much. When I first brought it home, I had a friend of mine do a "once over" on it, and checked the valves. Since then I've changed the oil every 15-20 hours and had the Stainless Marine tail pipes lengthened and made dry until the very end of the pipe (outside the boat). :drink:

Stormrider 12-11-2008 10:25 AM


Originally Posted by ziemer (Post 2757295)
Put gas in it. :evilb:

Haven't done too much. When I first brought it home, I had a friend of mine do a "once over" on it, and checked the valves. Since then I've changed the oil every 15-20 hours and had the Stainless Marine tail pipes lengthened and made dry until the very end of the pipe (outside the boat). :drink:

Nice... i had cut them shorter for steering ram clearance.
Bent a ram on one once... that sucked!

Nicolasticity 12-12-2008 06:41 AM


Originally Posted by duunoit (Post 2751855)
Are you sure that's Annapolis in the background? That looks like the 24 I sold to Nick out in England...


Chris its real similar to mine in the paint job which I think is great - tracks the lines of the boat and shows it off.

ziemer 04-14-2009 08:27 PM

Just gonna bring this back to the top since it's now spring time. :p :ernaehrung004:

Nothing has changed since Oct, other than I've put a few hours on it. ;)

Stormrider 04-15-2009 08:22 AM

ahhhh, i thought you were keeping it?

ziemer 04-15-2009 10:42 AM


Originally Posted by Stormrider (Post 2844568)
ahhhh, i thought you were keeping it?

I would like to keep it, but going on 6 months with no job. :mad:

It's been in the water 3 times since labor day. :(

Just throwing back to the top to see if anyone bites. ;)

ziemer 04-20-2009 09:20 AM

Here's a few shots of the "important part" from a couple weeks back. :drink:

http://i215.photobucket.com/albums/c...a/DSCN8523.jpg

http://i215.photobucket.com/albums/c...a/DSCN8521.jpg

http://i215.photobucket.com/albums/c...a/DSCN8520.jpg

http://i215.photobucket.com/albums/c...a/DSCN8522.jpg

http://i215.photobucket.com/albums/c...a/DSCN8525.jpg

http://i215.photobucket.com/albums/c...a/DSCN8526.jpg


All times are GMT -5. The time now is 05:49 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.