Used 24 Or 28= Must Be A Steal
#32
Registered
35., add another 5- 10 and make an offer on the black and white 24 with painted eyes. practically brand new. Also like the 24 with twins in miami, think its Mikes or one of his buddys. It came on here for sale about two months ago with pictures to follow but never happened. looked nice for the price.
here's the thread with pictures
http://www.offshoreonly.com/forums/s...4-pantera.html
Last edited by thedonz; 01-13-2009 at 08:45 PM.
#33
Registered
iTrader: (1)
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
I'd be all over it if someone wanted to buy mine
http://www.offshoreonly.com/forums/p...s-my-28-a.html
Or someone could buy Mike's and then we could work a deal so I wouldn't have to pay tax
#36
Registered
Join Date: Jan 2006
Location: Royal Oak, MI
Posts: 1,820
Likes: 0
Received 0 Likes
on
0 Posts
#37
Registered
iTrader: (1)
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
I'll put something up on the other site tomorrow if I get a chance. SERIOUSly...
and here's some info on it:
http://www.offshoreonly.com/forums/p...s-my-28-a.html
and here's some info on it:
http://www.offshoreonly.com/forums/p...s-my-28-a.html
#38
Registered
Join Date: Jan 2006
Location: LI, NY
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
#39
Registered
iTrader: (1)
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
I didn't take it out all year so what was at the end of the other thread was pretty much it. When I started it up this summer, I was getting a very light mist from the starboard manifold/riser joint onto the valve cover. One of the four bolts was stripped out of the manifold. It needs to be tapped or the manifold replaced.
The hull is a 1986, the trailer is a 1994 South Florida triple axle 10500lbs. The trailer doesn’t have brakes, but I have two new axles with disc brakes and a new coupler. I would say that the boat is in better than fair condition for a 22 year old boat. The engine is a 540. It had 28 hours on it when I bought it from Z.Zuperboat. I’ve probably put 2 hours on it. I took the heads off and had them flowed at HVH. I then had Bob Madera (rmbuilder) custom make me a solid roller cam based on the motor/heads/exhaust that I was using. The motor was dyno’d before I bought it at 627hp, but like I said, I changed the cam. Madera said that it should be around 650hp. It also has full hydraulic steering and a swim platform.
$28k with the motor, $23k without.
It has about ˝ a cabin. The major part is carpeted. I’m 5’10” and I can lay either direction without touching.
The hull is a 1986, the trailer is a 1994 South Florida triple axle 10500lbs. The trailer doesn’t have brakes, but I have two new axles with disc brakes and a new coupler. I would say that the boat is in better than fair condition for a 22 year old boat. The engine is a 540. It had 28 hours on it when I bought it from Z.Zuperboat. I’ve probably put 2 hours on it. I took the heads off and had them flowed at HVH. I then had Bob Madera (rmbuilder) custom make me a solid roller cam based on the motor/heads/exhaust that I was using. The motor was dyno’d before I bought it at 627hp, but like I said, I changed the cam. Madera said that it should be around 650hp. It also has full hydraulic steering and a swim platform.
$28k with the motor, $23k without.
It has about ˝ a cabin. The major part is carpeted. I’m 5’10” and I can lay either direction without touching.
#40
Registered
Join Date: Nov 2006
Location: Huntington Beach, CA
Posts: 1,955
Likes: 0
Received 0 Likes
on
0 Posts
Wow Chris, getting serious about movin' her huh? I've been meaning to send you back your spacer. I haven't touched it and likely won't... I'll send it to you next week if I can get my head out of my ass...