No you don't.

Here are your pics bigboat28.



http://i1267.photobucket.com/albums/...8/DSC_0874.jpg
http://i1267.photobucket.com/albums/...8/DSC_0875.jpg

You need to be a paying member to upload pics to the site, but anyone can post pics via link to an outside site.
But it wouldn't be a bad thing to be a paying member, and help the site that helps you so much.
Just saying....

Well said.

Just waiting on some warm weather to fill some holes and paint. West Systems says to use in temps over 50, what happens if you use it in colder temps? Anyone know?

I've been doing this work for 24 years now and usually ideal temps are out the window . You have to have something on the working surface that will keep the mosture out of your fillers and resens like a little space heater of blower .
When your not following the manufactures recomended temps your drying times and recote times are prolonged but you can still work . I've done fiberglass in 30 degrees standing over a heater .
The most important thing is when your done , leave your heat sorce on for a while after . Cold don't kill but dampness does !

It was over 60* today, you got it done didn't you?

You pass out from all the paint fumes>?:party-smiley-004:

:worthless_without_p

It's GREEN!

All back together for the most part, just a few little things to do. I dropped it off at XT for a new interior on June 28.

...