Offshoreonly.com
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Pantera (https://www.offshoreonly.com/forums/pantera-39/)
-   -   36 Staggered 525's - 2011 (https://www.offshoreonly.com/forums/pantera/245620-36-staggered-525s-2011-a.html)

ltr450k7 01-20-2011 12:43 PM
Originally Posted by mikebrls (Post 3296771)
they want to much $$$ for there boat's :)
Too Much ?


http://www.duckysboats.com/pre_owned...h=1206224&nv=y

ltr450k7 01-20-2011 12:44 PM
Originally Posted by ltr450k7 (Post 3302521)

http://www.duckysboats.com/pre_owned...R0&veh=1927428

mikebrls 01-20-2011 03:16 PM
Originally Posted by ltr450k7 (Post 3302521)
they just lowered the price $ 30 to 40 k on both boat's it look's like :)

i think the 28 was @ 159 k and the 36 was @ 199k

Expensive Date 01-20-2011 03:29 PM
Originally Posted by mikebrls (Post 3302690)
they just lowered the price $ 30 to 40 k on both boat's it look's like :)

i think the 28 was @ 159 k and the 36 was @ 199k
You are correct on the 28 and that 36 is used,I think it started around 209k

mikebrls 01-20-2011 04:29 PM
Originally Posted by Expensive Date (Post 3302700)
You are correct on the 28 and that 36 is used,I think it started around 209k
i wonder how many hour's are on the 28 even thow it is a new boat they have had for a long time ?

i hate to say it but with the economy the way it is they will have to sell that 36 for quite a bit less then what there lowered price is.
both nice boat's, but the only boat's that are selling these day's are the one's that are price to steal .

mike

XT-Innovator 02-01-2011 10:55 PM
Originally Posted by bigboat28 (Post 3298050)
Yes, Duckys 36 is at Checkmate and is a twin stagger. I have seen some pics but dont have them anymore. XTInnovations is doing the interior in it. The boat is still at the Checkmate factory. Neversatisfied on here is the one that showed me the pics of the boat.
Well to go into all the details on "who did what" on this boat would take a hardback book, but the bolsters came from PPI, we designed the rear bench seating, and motorlid, and Checkmate finished the side pads/cabin interior. The rigging did not go down the normal Checkmate production line either, and I can tell you that it was done right. The boat is finished and delivered to Ducky's now, but still needs a paint job to complete. I have heard nothing but compliments on the performance of the boat. I hope the dealer keeps everyone updated on it.

XT


All times are GMT -5. The time now is 07:03 AM.
Page 4 of 4
« First
2
3
4
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.