combat zone 24 restoration
#162
Thread Starter
Registered
Joined: Aug 2010
Posts: 2,535
Likes: 1
From: MA
https://www.youtube.com/watch?v=w6nX...e_gdata_player
Unfortunately the whistle of the blower will be gone next time this boat sees the water. Fortunately it'll be replaced by a pretty retarted cam lap.
Those holes on the dash will have gauges in em too!
I ran outa cash
MD
Oh yea!!! www.bluewolfinc.com sick underwater led. If you want em I got em less than MSRP.
Unfortunately the whistle of the blower will be gone next time this boat sees the water. Fortunately it'll be replaced by a pretty retarted cam lap.
Those holes on the dash will have gauges in em too!
I ran outa cash

MD
Oh yea!!! www.bluewolfinc.com sick underwater led. If you want em I got em less than MSRP.
Last edited by scarab63; 12-22-2012 at 05:16 PM.
#166
Gold Member
Joined: Sep 2010
Posts: 1,087
Likes: 0
From: LSC, MI
Can you post some more pics of the new sit down interior you put in? I got a 24/7 and prefer to sit down myself because of the low free board, but the stock seats do hurt the ars. I bet 1' of memory foam would help!
#168
Thread Starter
Registered
Joined: Aug 2010
Posts: 2,535
Likes: 1
From: MA
It's actually very basic. Bench seat made from 2x4 with memory foam & vinyl cover.
The seat backs are easily removable & I plan to make a center console for it so if I'm running it solo or two up it'll keep me pinned in from side to side.
Don't forget whatever pix I take won't really apply to what you'd be building since mines only a 3 man layout. I'm assuming your sunny is a standard cockpit ?
MD
#169
Gold Member
Joined: Sep 2010
Posts: 1,087
Likes: 0
From: LSC, MI
Sounds good on the pics thanks! Yep mine is standard cockpit. The factory sit down seats are ok but I want to build something that will give me more support, hold me in better, and better on the ars, gets scary sometimes in rough water and don't want to get ejected LOL. Your center console idea sounds good.



