Hull was overall good , only had to fill pinholes exposed by sandblasting , skim a bad fill job where the boat had docking lights and a few stress cracks in the forward V from rock docking

Deck was primed and one of my custom 1/8 aluminum windscreens was fitted

Hull was primed ! The finish from the strake down was good and made for a good base without priming so thats why you still yellow .

Hull was blocked down and any imperfections were filled or sanded out

Final prime was done on hull . Was blocked , wet sanded , then painted with Base and clear .

Last of the filling was done on the deck and it was primed and blocked one last time before paint .

Deck was bassed then cleared

Deck

Assembled and heading back to Massachusetts !

2nd Assembled and heading back to Massachusetts !!!!