Go Back  Offshoreonly.com > Owners Forum > Pantera
Pantera 28' with large windshield >

Pantera 28' with large windshield

Notices

Pantera 28' with large windshield

Thread Tools
 
Old 05-05-2012, 04:57 PM
  #1  
Gold Member
Gold Member
Thread Starter
 
Hydrocruiser's Avatar
 
Join Date: May 2004
Posts: 5,762
Likes: 0
Received 1 Like on 1 Post
Arrow Pantera 28' with large windshield

Question for you Pantera guys. I am thinking about getting an offshore boat and the only reason I might not go Pantera is because I need a large windshield on my boat (due to health conditions). Something along the lines of the widnshield on a Formula 38' FastTech.

How do you think it would look? Are there any Pantera's that have such a windshield present?

If I went with such a windshield is rounded better or one that is squared off. OWUld the factory work with me?

Thanks.
Hydrocruiser is offline  
Old 05-06-2012, 01:24 AM
  #2  
Registered
 
Join Date: Mar 2010
Location: Bethel Island, CA
Posts: 405
Likes: 0
Received 0 Likes on 0 Posts
Default

u could call Jo and ask him, the only tall windshield I ever seen was the pic of the fully enclosed boat that Pepe did along time ago. I would keep in mind boat builders with tall windshields probably put some thought into stepping around it to make it convenient and safer. JAime
JAIME is offline  
Old 05-06-2012, 09:24 AM
  #3  
Registered
iTrader: (5)
 
Join Date: Aug 2010
Location: MA
Posts: 2,535
Likes: 0
Received 0 Likes on 0 Posts
Default

I was thinking the same as jamie. If you do go this route. should look into a bowrider style windshield so you can hinge the mid section of the glass to have bow access.
scarab63 is offline  
Old 05-06-2012, 09:50 AM
  #4  
Platinum Member
Platinum Member
 
socalstone's Avatar
 
Join Date: Sep 2006
Location: Colorado / Lake Norman, NC
Posts: 999
Received 0 Likes on 0 Posts
Default

Probably would be a ton of effort, $$$ and wouldn't look that good.
If you need a big windshield I'd look at boats that come with them -
like the formulas, baja islanders, checkmates, etc. there are a ton of them out there.
socalstone is offline  
Old 05-06-2012, 06:48 PM
  #5  
Registered
iTrader: (1)
 
onesickpantera's Avatar
 
Join Date: Feb 2005
Location: Michigan
Posts: 4,388
Received 21 Likes on 10 Posts
Default

There might be some wind delfectors that would work on a 28. Would be much easier and look much better. I run them on my 24 and they work great.
onesickpantera is offline  
Old 05-06-2012, 07:52 PM
  #6  
Registered
iTrader: (1)
 
Join Date: Mar 2008
Location: lockport ny
Posts: 3,302
Received 36 Likes on 17 Posts
Default

there were some from a top gun in the swap shop. my flaps are alot smalller than the ones on my last boat. they still work decent but better than nothing for sure
88bullet is offline  
Old 05-07-2012, 11:41 AM
  #7  
Charter Member # 55
Charter Member
 
Griff's Avatar
 
Join Date: Oct 2000
Location: Omaha/LOTO
Posts: 19,558
Received 1,821 Likes on 907 Posts
Default

I do not think there is anyway to block the wind sufficiently on a 28 without totally destroying the lines of the boat. To completely block the wind, something would need to be at least 12" high if you are sitting and 24"+ if you are standing.
Here is a pic for reference. I am sitting and my freind is standing in the passenger bolster. We are both about 5'10".
Attached Thumbnails Pantera 28' with large windshield-griff1.jpg  
Griff is offline  
Old 05-07-2012, 12:46 PM
  #8  
JC Performance Engines
Gold Member
 
Stormrider's Avatar
 
Join Date: Jul 2002
Location: Long Island, NY
Posts: 8,891
Received 20 Likes on 17 Posts
Default

Motorcycle helmet.
Stormrider is offline  
Old 05-07-2012, 12:57 PM
  #9  
Registered
 
Join Date: Nov 2003
Location: Lake Travis ,Texas
Posts: 2,295
Likes: 0
Received 2 Likes on 2 Posts
Default

if you make the boat a sit down boat with short bolsters and add a winscreen it may work,, stand up,, no way.. my 27 Carrera is about as short and only way to get out of wind is to crouch down in seat and I have a 12" deflector on to of my normal winscreen.
https://fbcdn-sphotos-a.akamaihd.net..._5001391_n.jpg
HTRDLNCN is offline  
Old 05-07-2012, 12:59 PM
  #10  
Registered
 
Join Date: Jul 2009
Location: Bay City, MI
Posts: 1,402
Received 3 Likes on 3 Posts
Default

Shape of the fairing would make a full shield pretty difficult/funny looking I would think.
hotjava66 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.