X dimension for 24
#61
Registered
Thread Starter
Join Date: Oct 2010
Location: Miami, FL and FL Keys
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
I realized that one day I was taking off the wax with a towel I was standing on and slowly slide to the edge with just the slope of the deck lol and I had a buddy drinking during the regatta and he thought of using my deck as a slip and slide it just turned out to be the best slip and slide he ever used without soap hahaa
There are a lot of cops on those weekends but they usually don't bother unless your being a complete ******* but besides that they're just enjoying the view like everyone else
There are a lot of cops on those weekends but they usually don't bother unless your being a complete ******* but besides that they're just enjoying the view like everyone else
#62
I realized that one day I was taking off the wax with a towel I was standing on and slowly slide to the edge with just the slope of the deck lol and I had a buddy drinking during the regatta and he thought of using my deck as a slip and slide it just turned out to be the best slip and slide he ever used without soap hahaa
There are a lot of cops on those weekends but they usually don't bother unless your being a complete ******* but besides that they're just enjoying the view like everyone else
There are a lot of cops on those weekends but they usually don't bother unless your being a complete ******* but besides that they're just enjoying the view like everyone else
#67
Registered
Join Date: Sep 2008
Location: Miami FL
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
I'm running a volvo duo prop, no need to notch the stringers I'm hoping... and the transoms layered in 25oz.. It's solid. I was ganna do foam instead of the wood but i had mixed reviews figured I would stay in my comfort zone.
Last edited by NewBanana; 04-07-2013 at 10:28 PM.
#70
Registered
Join Date: Sep 2008
Location: Miami FL
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Stringer replacements going up about mid-boat, up front im redoing everything, filling in all the holes, replacing all the wood and glass around the door along with the wood around the front corner section.. and trying to figure out wether to keep or scrap the dash that came on it.. ill shoot some more pics when i get a chance of the floor out and progress.
Last edited by NewBanana; 04-11-2013 at 10:37 PM.